I have been inkleweaving for a few years and have always used a pattern. Recently a friend asked if I could create an inklewoven strap to look similar to this beaded strap (photo attached). I have no idea how to go about creating a pattern. Any suggestions would be greatly appreciated.

Comments

Vicki Allen (not verified)

Good morning, Grannymaggie,

An inkle is a two-shaft loom. When one shed is up, the other is down. Therefore to design a pattern you make two rows of squares and draw your pattern in there.

I think in order to get the blue squares in such an irregular order, you will have to use all white for your warp and do a pick up technique to insert the blue squares.

I'll bet some of the others will be able to say this better than I can.

Vicki Allen

jeanne (not verified)

Hi Grannymaggie,

I am guessing that the band you're trying to replicate is- twined?-- totally weft-faced. To do this on inkle, you need to visualize it as a warp-faced weave for the ground structure. I'd begin by making a warp with four 2-warp stripes, one at each edge and the other two dividing the design area into three parts. This would mimic the "ditches" of the warp on your sample band. Then I'd work plain weave, and use a supplementary weft to add the design patterns.

You could check Helene Bress' book in the section on brocading, or Laverne Waddington's backstrap tutorials on supplementary weft design for this technique. Think about how much width you'll need in your design areas to  achieve a square design with your heavy supplementary threads. 

Looks like a fun project!

Jeanne

 

sally orgren

If you look under projects and drafts, you'll see some original inkle patterns I have designed and posted. (I have to save them as pdf's as you can't draft Inkle patterns well with the traditional weaving software.)

To do pick-up and place designs where you want, look at how I threaded the loom with alternating pattern threads (1) for every 2 background warps. So the pattern threads come up in alternate rows, not all on the same row. (Essentially you are placing them on alternate "shafts")

Think of what a checkerboard looks like...the black boxes on the first row of the board represent one set of strings in the "up" position. The second row represents the opposite strings in the "up" position. "Up" means that the color is on the surface of the weaving. If you have a red box between two black boxes on the checkerboard visual, you can choose to pull that string up between to the two blacks if you want to create a solid line (like the center of a cross-motif in your photo.)

I try and design my patterns to work with this naturally occurring "checkerboard" (shed) so I am not having to "pick up" or "push down" too many strings on each row (pick of weft).

You also need to think about how long the floats are on the back side. Depending on the fiber size, you might not want them longer than 3-5 picks of weft. For the photo you posted, you might need to move the design motifs closer together, or design a dot of blue to come up every once in a while to prevent long floats of your pattern weft on the back side.

Keep us posted on your progress! DO give it a try, get some grid-paper and color up your design. It'll stick better if you try it yourself, than if we draft it out for you.

Sally

sally orgren

Here is a section of a draft I drew up, "Norwegian Star" to show the treadling. "U" = an "up" row, "D" = a "down" row. (This is when you are pushing the whole warp up or down near the sting heddles to create the shed, or opening for the shuttle.)

Starting at the bottom of the diagram, the first 4 rows are "plain weave," creating an effect just like a checkerboard. The numbered rows are the pattern rows, where you manipulate individual warps to create the pick-up pattern.

On the 1st pattern row, the "slanted oval" means that although the thread would normally be up, I need to push it down so the weft keeps it to the back of the band. On the next row, there are more ovals, so again, I push those particular threads down to the back before passing the shuttle across.

On the 3rd pattern row, you see a slanted oval AND an "X." The X tells me I need to pick that particular thread up from the back and bring it to the front, so the weft passes underneath it. This is where I start to form horizontal lines across the band.

As you can see, diagonals are also possible (another motif in your photo along with the crosses.)

Note this design's longest float length is 5 passes of weft. (Can you figure out how I know that?

Finally, one of my personal tricks when weaving with the Inkle for pick-up, is to place colored string heddles in key places (center spot for sure!) to help me keep track of where I am across the warp. (That is why you see those orange bands running top to bottom on this illustration.)

Okay, let's see what you come up with! Make a checkerboard on grid paper, and them impose your design motifs on top. Finally, figure out which threads you must push to the back, or pull to the front, to refine your design. I am sure your friend will be delighted!

 

Vicki Allen (not verified)

Thank you, Sally!

I will surely put this to good use! I love inkle work and I did not know how to do designing! I can't wait to play around with it!

Vicki Allen

Claudia Segal (not verified)

I know some people use Excel for their designing and Alice Schlein teaches how to do this in Photoshop for Weavers.  Alice is taking a break from Cyber Fiber for the moment and she may return in the fall.  

I have often enjoyed designing the old fashioned way with graph paper and colored pencils.  Oh, and erasers, too.

Claudia

Submitted by Anonymous (not verified) on