I was given an old loom a while back and it appears to be very similar to the loom detailed in the book "Foot-Power Loom Weaving" by Edward F. Worst.  I have all the parts but the prior owner tried to change the loom to work with pulleys instead of horses and rollers.  I like the system that Glimakra uses on their counterblance floor looms and was going to install something similar but recently a friend tried to convince me to stay with the horses because it was more historically correct.  I've recently got the loom to the point where it weaves (I tried it with some jute I had on hand) and it works nicely (jute is terribly rough on the heddles however).  I just did a plain weave on it to see it in operation.  I think that If I kept the horses and then strung the loom as I wanted to that I would have the best of both worlds: keep the historical and use the modern.  That way if someone wants the loom later on as a historically accurate representation they can switch back to the horses but for the time beoing I can use the smoother (I think) operation of the rollers. Since my experience is extremely limited, what do you think?

Regards.

Charles

Comments

Joanne Hall

Hi Charles,

Both tie-up methods work.  Horses might treadle more smoothly, and might do better with 3/1 sheds.

Just choose one tie-up method, get some nice tie-up cord, plan a short warp and do some weaving.  Contact me is you have shed problems, which might happen with a narrow warp.

[email protected]

Slipstream (not verified)

I went to the Glimakra USA site and was impressed with the information available on the site regarding weaving in general.  You have created a wonderful online environment.  i enjoy seeing how others in remote (non-urban) locations have been successful.  Being in a remote location myself I can appreciate the obstacles. Thank you for being so helpful.

Best regards,

Charles

 

 

Submitted by Anonymous (not verified) on