I want to weave a scarf and create some differential shrinkage.  Will it work with cotton and wool?  I have never tried this before and some of what I have read suggest using cotolin/wool or tencel/wool/cotolin but I haven't found just cotton and wool.  Those are the two fibers I have in the greatest number of colors.  I am planning a narrowish, long striped scarf and will do some sampling but want to have it ready by Friday.

TIA for any suggestions.

Claudia

Comments

kerstinfroberg

Absolutely! Cotton/wool is what I use most frequently. The "problem" you will have is to determine the shrinkage - once shrunk, it can't be undone.

I have an article on my website where I have collected my observations, should you be interested.

Have fun!

Bonnie Inouye (not verified)

Claudia, not all wool shrinks easily and some wool is treated so it will not shrink.  The easiest wool to use for differential shrinkage is merino that is not "super-wash". Jaggerspun merino is great.  Habu has some very fine wool that is spun for differential shrinkage. If you just happen to have wool in your stash, you definitely need to sample it for the amount of shrinkage. If you plan stripes of wool, I think the results are best if each stripe is the same kind of wool so it shrinks the same amount.  Your cotton stripes need to be wide enough to show some texture. There are really lots of examples using cotton and wool as this is probably the most common choice for differential shrinkage if you look at all the different structures and designs that weavers have used.

The resulting texture depends on the fiber and twist in the non-shrinking yarn; cotton will give a different look from Tencel or linen. Textures always show more clearly when the non-shrinking yarn is pale. The shrinking yarn can be any value.

Bonnie

Karren K. Brito

When I was looking for yarn combinations for collapse fabric I found a test that proved useful to me: tie the two or more yarns together in a secure knot and measure off about 2 yards.  Wash, boil, whatever this little bundle  of yarn just like you were finishing the piece.  When dry the yarns need to show a difference of length of at least 2" but 4" or more is ideal.

Claudia Segal (not verified)

I found some Jaggerspun in my stash and am trying Karren's test as well as a short warp.  I'll keep you posted.  Thanks for all the help.

Claudia

kerstinfroberg

Don't make your sample/short warp too short.

For my first experiment with diff.shrinkage, I wove a sample 50-60 cm long. After machine washing, I found the shrinkage to be 25%. Went on to weave the piece, allowing for max 30% shrinkage. After washing (same machine, same program, same temp) the shrinkage was almost 35%, and I had a shorter-than-wanted scarf...

The reason could be either that it is difficult to measure, and a small mis-measurement can result in bigger differences (25% of 50 cm = 12,5 cm -> 25% of 200 cm = 50cm - while 30% of 50 cm = 15 cm, and 30% of 200 cm = 60 cm) - OR it can be that a bigger wash-load (a whole scarf compared to a small sample) shrinks more, because it gets more "work" in the machine.

FWIW, I like my shrinkage to be 35-40% for "best" look.

Artistry

Claudia I have been experimenting with seersucker this summer, which i think would fall into the category of differential shrinkage. Although there are different ways and materials to do seersucker I have started off with wool and linen and wool and cotton. I used harrisville because that's what I had in my stash. My most successful pieces repeated the same proportions of warp stripes in the weft. A lovely bumpy cloth. Don't wash for too long, I had several samples full and although lovely cloth it wasn't seersucker anymore! The wool and cotton worked much better than wool and linen. I found larger proportions of cotton than wool made a more interesting texture. Have fun and post a pic!

weaver-dyer (not verified)

Cathie,

Although your fabric may look like seersucker, it is probably better to call it differential shrinkage.  "Fairchild's Dictionary of Textiles," describes seersucker as, " A popular cotton fabric with permanent woven crinkle stripes in the direction of the warp.  Produced by weaving the ground ends under ordinary tension while the crinkle ends are woven slack; also made in rayon, acetate, and manufactured fiber versions.  Made in a variation of the plain weave on two beams in simple and fancy stripes, checks, and plaids. . . . "

Creating fabrics using differential shrinkage is exciting. I hope that you will post your results. 

Lots of examples of differential shrinkage can be found in "Fabrics That Go Bump: the Best of Weaver's" and also in the sample notebooks of the Complex Weavers' Collapse, Pleat, and Bump Study Group.  The notebooks can be borrowed from the Complex Weavers library by Complex Weavers members.

Janet

Artistry

Hi Janet What you describe is what I'm planning now, two different tensions, one firm and the other extra firm, in cotton. It will be fun to see what I get. I took the ideas for seersucker from Sharon Alderman's book Mastering Weave Structures Transforming Ideas Into Great Cloth. I agree putting the shrinkage in the weft as well is a bit of a stretch ( no pun intended) but it sure makes a fun cloth! Cathie
Submitted by Anonymous (not verified) on