Hi!

I soon will be setting up my first weaving studio in our home and have the choice of a room with new wall to wall carpet or a room with a hardwood floor.  Which would be better and why?

thanks!

Candace

Comments

Vicki Allen (not verified)

I, too, have to make the decision of what flooring to choose. I am leaning toward a low, dense carpet like a Berber. Or maybe a flat, industrial/office type would be better since it would be level. I think carpet would keep the loom from trying to walk and also keep the room quieter while I am weaving.

I will be interested to hear what others have done.

Vicki Allen

Ellen (not verified)

I prefer a wooden plank floor, it makes it easier to sweep all the fluff up that always arises. But then I have rubber "feet" under my loom, so it does not move.

passapman (not verified)

As one who has cleaned carpet for others and myself for decades, I have to say, berber carpet is a difficult carpet to keep looking nice. Once the loops matt down it is hard to restore them to their original beauty. You definitely need a really good upright vacuum like a Kirby, a metal Royal, a commercial Hoover, or a Miele S7. Sorry, nothing else makes the grade for berber carpet, not even a central vac.  I know my vacuums and I know carpet. Been cleaning for 40 years.

The wood floor is a much better option. Plus you can showcase rugs you have woven.

Vicki Allen (not verified)

Thanks, Passapman, that is good to know about the berber. I will scratch it off the list. Also, I had not thought about rubber "feet" for the loom. That sounds like a good way to go. I had not felt comfortable about losing pins and needles in carpet anyway.

What do you all think about the wood-grain pattern of linoleum?

Vicki Allen

Ellen (not verified)

I should think that would be ok as well. I just mentioned wood, because that is what I have. Again, I'd say any sort of hard surface. wood, lino. cork tiles....

sally_libby (not verified)

We are going to replace our carpet with hardwood floors in our studio in the near future. Sally

EvaHall

Considering the amount of dust you get when weaving I would definitely go for wood or linoleum.

Eva

Karren K. Brito

I like hard surfaces better too.  Easier to clean and who knows what you may want to do in the future, paint a warp?  There are some lovely, to me at least, rubber style industrial sheet flooring that would keep things from walking and absorb some sound.

Other flooring comes in large tiles and is anti-fatigue.

 

naturalfibres (not verified)

most places where I've had my loom the floor has been tile or lino - to keep my loom from moving I taped squares of sandpaper to the floor under the feet (rough side up).  In our current house the floor is wood laminate, so instead of using the sandpaper I'm using large foam squares under the feet.  My loom doesn't move at all.

In our last house I did have my loom on carpet and it still walked.

jlread (not verified)

Personally...I would not have carpeting anywhere in my home...I do have a few small area oriental style carpets, here and there.  Carpet holds all kinds of 'nasties' and I don't think any vacuum can really clean them.  In the Summer, my carpets go out and over the pasture gate to be scrubbed and hosed off....rolled up and wait till Winter to be put back down...These are all wool and clean up beautifully.  I have rubber squares under loom feet.

sally_libby (not verified)

Foam? What type of foam? Where did you get it? Thanks, Sally

sally_libby (not verified)

Rubber? What type of rubber? Where did you get it? Thanks, Sally

passapman (not verified)

In my studio, (soon to have a loom) there are kniting machines, sewing machines and sergers. The flooring I opted for is grey textured dense foam tile that locks together like puzzle pieces. It can be purchased at Lowe's. It is easy to self install. Although it is a bit industrial looking it does provide sound and thermal insulation, and is somewhat cushy, but with a surface that is easy to sweep or vacuum. A little over 1.00/square foot, and can be installed as you go, placing objects on it as soon as it is installed. If you have uneven spots in the floor making the joins want to buckle rather than lie flat, a dab of floor adhesive is all it takes to tack it dowm. One of the side benefits is that free-standing cabinets will self-level even if the floor is slightly uneven!

Passapman.

jlread (not verified)

I found rubber squares at Lowes in the dept where you find furniture floor protectors....they have adhesive on one side and work really well

Slipstream (not verified)

I built a new home and I insisted on oak flooring coated with special urethane used on basketball courts.  It has been a number of years and the floors still look great. After having several contractors come in and try to install the wood I finally did it myself.  The one mistake I did make however was using a stain.  My home is South facing withs clerestory cielings (2 stories) in the South end and the sun has bleached the stain out except where I have rugs.  Strategically placed rugs and wall hangings absorb the sound well.  I have a recording studio on site and if you are careful about the placement of the sound absorption materials (tapestries and Indegenous people's woven rugs in my case) so that you do not get direct reflection from the sound source the rooms are very passive accoustically. The floors are easy to keep clean and if you use optical brighteners in your coatings they look great for years.

Regards,

Charles

Submitted by celtinbirks on