When you sit down at a loom is there a standard for the operation of the treadles.  By standard I mean would the first treadle on the right activate the heddle closest to the front of the loom, the second treadle from the right would activate the second heddle in and so forth? I'm still waiting for my books to arrive and I suspect a lot of my questions might be answered.

Best regards,

Charles

 

Comments

Vicki Allen (not verified)

I learned that the shaft closest to you was shaft 1 and the treadle on your left operated shaft 1. That was a 4 shaft counterbalance loom. Since then I have learned that you can generally attach any treadle to any shaft if you need/want to. It all depends on the type weaving you are doing and if moving them makes the weaving easier in some way.

I hope you will ge getting Deborah Chandler's book. It is a good beginning book.

Vicki Allen

Slipstream (not verified)

Thank you Vicki. I am getting Deborah Chandler's book and also the "Big Book of Weaving" thanks for your help.

Best regards,

Charles

Michael White

Charles, The simple answer is "what ever floats your boat." You can tie up your treadles anyway you want, as long as you are comfortable with what you are doing. You can dance the treadles from left to right, right to left or use both feet left and right. The key is being consistent.

Michael

naturalfibres (not verified)

I have a counterbalance loom and use the universal tie-up for my treadles:

going from left to right - treadle 1 is tied to shafts 1 & 3, treadle 2 is tied to shaft 1, treadle 3 is tied to shaft 2, treadle 4 is tied to shaft 3, treadle 5 is tied to shaft 4, treadle 6 is tied to shafts 2 & 4.

Slipstream (not verified)

Thank you all for your responses.  Since at this point I have no particular preference I think I'll use the "universal tie-up"  that should give me a specific starting point and then I can depart from that if I wish. 

Best regards,

Charles 

star619 (not verified)

I purchased a 36" Lillstina floor loom, used, from about 25 yrs. ago. The heddles and "roping" all need replacing. I did find a great person to point me toward the handbook online. Does anyone have a Lillstina, or know of another site to glean some information? I've only taken 4 classes on a jack loom, and some of the differences are puzzling. Thanks. star619

sally orgren

Contact Jerri Shankler -find her under members, here at Weavolution. She's a pretty good "loom doctor" and I believe has or had one of these looms. Worked really hard to get it working well.

sally orgren

Charles,

I think if you have a jack type loom, one thing you need to be aware of is which shaft(s) are carrying the majority of heddles on your chosen structure. Some structures have a majority of their warps on a particular shaft or two. With a jack loom, you'll want to be sure to use the first few shafts for those loads, so it is easier to lift. And one of the center-most treadles is also probably easier to lift than one on either edge of the loom that requires more of a reach.

Along those same lines, it depends how many shafts you have. I have a 12 shaft loom with even more treadles underneath. It can get pretty goofy-looking if I have to treadle the treadle on the far left and then hit the one on the far right, even with a "commuter" bench. So sometimes I rethink the way I tie up, making it easier for my feet to logically "dance" along the treadles, and maybe not have such a huge spread.

A final thing to consider, balance. It's going to be the most relaxing to use both feet about equally, instead of one leg most of the time. (That means you can weave longer in one sitting!) So although it might be logical on paper to always tie up shaft one to the left treadle, if you find yourself doing 80-90% of the work with your left foot, you might want to consider moving your tie-up to the center four treadles.

Kudos for even asking this question—that's a certain sign of the makings of a good weaver!

Slipstream (not verified)

Thank you Sally:  I really appreciate the insights. I can understand what you are saying and it makes sense. I was given a loom in a basket that I am trying to put back together and I needed a place to start from and that was why I was interested in a "standard." I can truly see the value of your suggestions and I will keep them in mind as I get going. Thanks for taking the time.

 

Best regards,

Charles

Bonnie Inouye (not verified)

Charles, it is not all that hard to change the tie-up on most looms. Sometimes I use a treadling sequence that alternates pattern treadles 1, 2, 3, and 4 (usually 1+2, 2+3, 3+4, 1+4) with two background treadles, a and b (usually 1+3 and 2+4).  There are treadlings like this for 6-shaft and 8-shaft looms, too- treadles a and b alternate with pattern treadles. Whenever I see this arrangement, I want treadles a and b on the left. Then I use my left foot for treadle a, my right foot for a pattern, left moves over to b, right makes the pattern. It makes it easier to create new patterns or to follow a pattern when I can alternate left-right-left-right this way.

I look at the treadling sequence and figure out what will be the best arrangement for this sequence. Sometimes the lazy way, leaving them tied from the previous warp, makes weaving harder than it should be.

Bonnie Inouye

Neshobe (not verified)

Charles for asking the question that resulted in some answers I needed! 

I've been playing around creating drafts so that I can learn to visualize them better.   I start with an existing draft and then start making changes to see what will happen.  I made what I am calling a "falling twill" (for lack of knowledge of a proper name), twice, on two different downloaded drafts.   Though the resulting threading was the same on both, the tie-ups were different. On one, the treadling turned out very complex.  On the other, the treadling was simplicity itself: 1,2,3,4.  And it was all in the tieup.  Revelation. 

Then I figured out how to get tabby edges and blocks on a Bronson's lace by changing the tieup on my 4h5t loom.  I know that's likely something basic, but I was excited to have figured it out on my own.  At least on paper.  Now I'll do a sample and see if the yarn agrees. 

Dayle Ann

Joanne Hall

Hi Charles,

Next, you need to find a pattern in a magazine or book for something that you want to weave.  Follow that pattern for the treadle tie-up.  There are many ways to make tie-ups, so it is best to select a pattern and follow the instructions.   Then when to start another warp, the instructions might be the same or they could be different.  With each warp, you will learn something new.

Joanne

Slipstream (not verified)

thanks Joanne and everyone else who have responded to my question.  I have a learning procedure that seems to work for me.  I guess I am a linear learner, some things I pick up intuitavely and others I have to work at.  I finally got a copy of "Weaving; A Handbook for Fiber Artists" and it laid things out in a structured way.  So since I wanted to start with a plain weave I found out that the treadles are numbered left to right kind of and so I am going to go with treadle 1 = Shaft 1, treadle 2 = Shaft 3, treadle 3 = shaft 1 & 3, treadle 4 = shaft 2 & 4, treadle 5 = shaft 2 and treadle 6 = shaft 4. Once I can weave a bit of plalin weave with that setup I'll start getting a bit more creative and pick some patterns.  Baby steps, I have a hard time wrapping my mind around things sometimes.  Do you consider this a valid approach from the perspective of those of you who teach? 

Joanne Hall

Charles,

When you make this tie-up, you will need to use two feet for some sheds.  When you make the tie-up, be sure to make the treadle touch the floor when the shed is the right size.  Then for each treadle that you might use with it, you need to adjust the treadle cord so that the two shafts line up together.  When you put both feet down, you need a clear shed, so if both feet touch the floor it will be easier to weave.  Sometimes, it is easier to tie two shafts to a treadle, as then you do not need to do the coodinating of all the singly tied treadles.

I had to tie up a summer and winter weave this way, as the loom did not have enough treadles.  When I was done with that weave, I never tied up treadles individually again.  It takes longer to tie them up to get good sheds, and if they don't touch the floor, it is uncomfortable to try to get both feet to push each treadle down enough to get the shafts to be together. 

Joanne

Submitted by Anonymous (not verified) on