I was just wondering what type of 4 harness floor loom is most popular?

Thanks!

Celt

Comments

WeaverDave (not verified)

I would have to say jack looms are more popular.  Jack looms are not as strong as counter balance, or countermarch, and can be made less expensive because they don't need the extra strength.  Counter balance/march types are very strong to support rug warps at high tension. 

You can make all sorts of wonderful textiles with a jack loom.  And, you can get very fancy with drafts and patterns and have a lifetime of weaving on a jack loom. 

One other factor is that the tie-ups for countermarch are considered to be very complex because when one or more shafts are raised, the remaining shafts must fall.  This creates the shed.  Jack looms are much simpler to setup.

Just my opinion.  I'm not 100% certain, but this is what I suspect. 

Michael White

I will have to agree with Dave. IN the US Jack loom are the most common. In other parts of the world a counter balance loom is more common. You know you have opened up a can of worms (g)

kerstinfroberg

In Sweden I have never seen/heard of a jack type floor loom.

padmavyuha (not verified)

The only jack loom I've ever seen in the UK was a Canadian one :) (Leclerc Artisat). Well, and pretty much all the table looms are jack looms, in that they just do rising shed.

lkautio (not verified)

The most popular loom type will depend a lot on where you are looking and the year.  In the US you will find jack looms dominate now though counterbalance was most common in old looms. Locally in New England (NE USA) we may have a few more CB and CM looms than the rest of the country, but jack looms still dominate. In Europe, there are few jack looms. 

Jack looms can be equally strong as countermarch or counterbalance looms (think of Macombers, LeClerc Colonials, large AVLs).  It's just a shed mechanism, not a loom framework.  Some CM/CB looms are small, not sturdy, or even foldable. 

Also, jack looms can be rising (more common now) or sinking shed.  Properly configured they can approximate, but probably not quite equal, the even upper and lower shed tension found in CM/CB looms.

Laurie Autio, with two jack looms and a CM

Sara von Tresckow

Popular is as popular does.

When considering a loom, the main consideration should be that is is a quality tool to produce the type of fabric you wish to produce well.

Pet rocks were also once popular.

handspunhandwoven (not verified)

Pet rocks were also once popular.

+grin+

padmavyuha (not verified)

Pet rocks have their place in the workshop too, you know :)

Karren K. Brito

Cute small weighted warp loom!  Never seen anything like it.  All I've seen when I travelled in the Nordic countries were wall sized warp weighted looms, mostly as historic points of interest.

Michael White

I would rather pet my wife then a rock. I guess some people are having a "hard" time (g). That is a cute loom. Maybe it and "Icky" need to get together to see that they can make.

Michael

 

TNWEAVE (not verified)

For the beginner a jack loom is very popular. The cost is lower to purchase one and they are easy to ship and store. If you are not sure that weaving is for, but you want to give it a try without spending a large amount of money, than look at a jack loom first. If you like weaving and will weave at home, not taking the loom to events, than a heavier counterbalance or countermarch with a wider weaving width would be best.

Sara von Tresckow

Sorry, but there are nice counterbalanced and countermarche looms that sell for less than the current crop of jack looms - and the cloth they make is superb.

Popular is as popular does - sometimes those popular girls in high school didn't work out that well in the long run.

rlmarchand (not verified)

The Jack loom is more popular in the U.S.  I have both a jack and countermarch.  However, I love my countermarch.  It is much easier on my knees and back.

Shelley

steve104c (not verified)

Sara, That was really good. You even made me laugh. Laughter is the best medicine...................................Steve.

Submitted by celtinbirks on