I have a jack loom that is warped with 5 yds. of 2 different weight yarns and I am having a dreadful time keeping any decent tension in the warp. I can speculate where I went wrong, but the bottom line is, I need to get this somewhat under control. The only thing I can think of is wind it all on to the fabric beam (while keeping taut as possible) and then rewind it onto the warp beam, once again trying to keep tension while doing so. Does this sound like the right thing to do?

Comments

Karren K. Brito

But I would get some help with the tensioning when rewinding this warp.  Can you find an experienced weaver from your guild to help?

callagain (not verified)

I'm afraid not - I am self taught (a rough road, to be sure) and have not joined up with a guild. I know, I know, this is a lesson in the importance of joining a group smacking me upside the head....   :^) 

 

Michael White

Are there sections that are giving you a problem, like in the middle-one side? I see that you have gone off line. If there are section that do not have even tension you could group that section of warp and hang a weight from the back to help tension the group.

Hi, Steve not working today?

steve104c (not verified)

I'm Just N. of Houston. Need a hand?

callagain (not verified)

Very kind offer, but I am in Rockwall, 20 miles east of Dallas. :^)

Claudia Segal (not verified)

Hi,

Can you provide us with some pictures?  You mention that you are using two different weight yarns, is it possible to hang weights from the yarns that are causing problems?  Michael mentioned this and it can work to help with the difference in the two yarns.  

I have an extra beam and, when I used to have a jack loom, this would happen on occasion and I would wind the two sets of yarns on separate beams so the tension was separate.  I would then hang extra weight on the second beam to hold it under tension.  It's like having a supplemental warp beam.  

If you can add pictures, it would help us see what is happening and offer better suggestions.  (There is a HELP topic on how to add pictures to your post if you need help with that.)

Claudia

katski (not verified)

I have actually unwound and rewound a warp, as you mentioned. It was a linen warp, only about 3 yards. It seemed to be the best way to fix the tension and I just went with it. It worked. I did it by myself, it was a short warp. But it would have been easier if I had a person - anyone, really, not necessarily a weaver- to help by holding the warp taut while I wound it on and rolled in the packing. But no one else was home and I was impatient. As I said, it did work.

Submitted by Anonymous (not verified) on