Hello to all, the time is approaching to finally install new Texsolv heddles, and tie ups on my recently restored Harold Marquardsen loom.I should mention that this loom is nearly identical in all aspects to the Toika Liisa, the only real difference being that the treadles are front mounted.The loom has an over all weaving width of 54 inches at 60" wide. 59" height. I have 6" reeds, and would of course wish to have the best possible shed. Thanks,Regards, Frank A Dykes.

Comments

steve104c (not verified)

You need to contact Joanne @ GlimakraUSA and get her book on Countermarche Loom Tie-up. I refurbished a Glimakra Standard and didn't know how to tie-up the loom and bought Joanne's book. It is great. And if you have any questions, she will talk to you over the phone or through email. She is the best when it comes to countermarche looms........Steve.

TheLoominary (not verified)

Thanks Steve, I have the book, and will be using it for sure. I am hoping to hear from some of those with experance on the Toika Liisa, as the looms are so very similar. Frank.

Claudia Segal (not verified)

Frank, that's a beauty.  Did you know you can add the picture to your comment?  You need to be using either Firefox, Chrome or Safari for your browser and the Help topic to lead you through it is HERE.

Keep us posted on your progress.  I am very curious about the Toika Llisa.  I like what I have read about it but there don't seem to be many people who own one.  

Claudia

TheLoominary (not verified)

Thanks Claudia, I'm still learning my way around here.Restoring a rare loom, designing, and building my own equipment,learning to weave with so much more to go has been a wonderful ride! I guess it's all about trip, not just the destination! Frank.

Sara von Tresckow

While 280mm Texsolv are the most common, if your loom will accommodate the 310 size, you'll have a slightly larger shed.

You might want to tie a few string heddles in both sizes, mount just 2 shafts and try them out to see which you like better.

TheLoominary (not verified)

Sara, I bow to you! Thank you for your sage advise,I now have a starting point! Regards,Frank.

TheLoominary (not verified)

Hi Sara,did you refer to 310 size, or 330?,as I can't find 310. Thanks, Frank.

Joanne Hall

Hi Frank,

Another variable is the breast beam height.  If you want to have more than four shafts and your breast beam is not at least 35 inches, I would not suggest heddles longer than the 11 in, 280.  You need space for the lamms, shafts and treadles to move. Read page 26 of my book about the length of the lower lamms.

Joanne

Joanne

TheLoominary (not verified)

Thank you Joanne, I wouldn't attempt a countermarch tie up without your book,It was the first reference I had upon receiving the loom. My breast beam is 36.5 inches.Hopefully that is enough room for proper movement,and the longer heddles.Also, both sets of lambs are equal length so I will be watching if the shafts balance.Thanks for the advise, and the book that tells it all! Regards, Frank

Claudia Segal (not verified)

Frank,

I have an old, old Glimakra Standard and both sets of my lamms are the same length.  I am using the 280 cm heddles and there is enough room for all.  I don't think I could say that if the heddles were longer but not sure.

I like Sara's idea of tying a few, put a short warp on and testing which length works best for you.  As you said, sage advice.

Claudia

I, too, adore Joanne's book.  I go back to it often.

Sara von Tresckow

Sorry, there used to be a 310 heddle - have a couple thousand of them that came off my old Lillqvist when I converted to the 330mm for the Toika dobby shafts.

Try 318 or 330 - probably by starting long and shortening your test heddles.

Where did you find your loom? You're right about the Bauhause connection with Marquardsen - BUT they were actually better known for their huge professional looms - usually 8 shaft 8 treadle, fly shuttle - 60" - 72" and so big and tall you needed to "climb the rigging" - worked with live weight tension and were the standard bread and butter looms for production handweavers.

I still belong to Weben+ and evey issue has ads for at least one of them.

Can you tell I used to live VERY close to Flensburg???

TheLoominary (not verified)

Thanks Sara,I was also considering the 318 heddles as a possibility when trying the test heddles.The story of my Marquardsen loom,it's journey to the US, and into my hands, as well as it's restoration, should appear in the "Loom supplement" of "The Spinning Wheel Sleuth" this February.I know Marquardsen professional looms well as I also own a 72" model with an 11+ foot fly shuttle!The fly shuttle mechanism contains a fly wheel with numerous gears, and weighs in at about 60 pounds! Both Marquardsen looms were live weighted,which is why I designed and built a friction system controlled by a foot pedal for my 60" loom.Thanks for your input,as there is so little known about these sturdy German looms,Frank.

Dawn McCarthy

Hi Frank - I used to have a Varpa (almost identical to the Lisa) I now have a Toika Eeva (lam proportions the same) and have owned a Glimakra.  I would recommend 11" heddles (as Sara suggested make a jig and some string heddles of that length and try first to be sure.  The lams are the same length, not an issue for me, on certain tie ups I will take the lower lam cord up 1-2 notches of texsolv (the issue is the weight of the treadles and the treadle cords going front to back).  This may not be an issue for you as your treadles are front mounted, but if your last few shafts are lower than the front, take the lower lams up a notch to balance the weight of the treadles.  You can contact me off list if you want, I think I have some photos of my varpa loom on my blogs - bloominloom.wordpress.com and bloominloom-dawnmccarthy.blogspot.com - also see the forum Toika and varpa looms.  

Dawn

TheLoominary (not verified)

Hi Dawn, thanks for the input on tie up for my Marquardsen.I will do the test heddle method before purchasing my Texsolv's.I have also joined the Toika group.I'm sure as Liisa issues arise the postings will be of benefit to me as our looms are so similar.Regards,Frank.

Su Butler

HI Frank....I have a Toika Liisa loom, 59" wide, 16 shafts. To get the best shed on my loom I use the 330 Texsolv heddles. They are about 12.87" long. If your loom is really fashioned like the Liisa, then you have to be careful about how you tie up. Toika looms function best when tied up so that ALL elements are parallel to the floor.....that is shafts, lamms and treadles are all tied PARALLEL to the floor, not in graduated steps like the Glimakra and some other CM looms. Seeing that you have front hinged treadles, and I do not, I am unsure of how you would tie the treadles, but on any Toika loom the treadles are tied from back to front, parallel to the floor, all cords the same length from lamm to treadles and all cords tied taut. Su

TheLoominary (not verified)

Hi Su, thanks for the Toika tie up info.After closer scrutiny of the Liisa lambs,and raised treadles, they appear to be located higher in the frame, leading me to believe that with low front mounted treadles having a longer travel to the harnesses with lower lambs, it will require a graduated tie up.This also indicates there is less travel overall.What all this means to me is I am leaning toward using the shorter 11"- 280 treadles. Sound reasonable? Thanks, Frank

3looms (not verified)

Hi Frank, and congratulations on your restoration project!  You did a great job.

I also have a Marquaredsen loom, mine is 8 shaft, 10 treadles with an overhead beater & the live weight braking system (and a flying shuttle which I've never used).   I used 280mm Texsolve heddles & never had any problems, fyi.

Kate

TheLoominary (not verified)

Hi Kate! Thanks for the info on using the 280 mm heddles. That pretty much confirms it! I've made some changes to "Harry".We now sport a brake system completely adjustable, with a foot brake action.Thanks, Frank.

3looms (not verified)

you built there, Frank!  Once I got the live brake adjusted I love it.  It took some fiddling, but once it's balanced you never have to touch it again!

TheLoominary (not verified)

Thanks Kate. Since you have live weight braking, I'll mention, If you should ever need a source for hemp rope I have one.This rope is an extremely soft hemp with no oily orders, residue, or chemicals. It has been made in Holland for about 200 years. Frank.

Submitted by Anonymous (not verified) on