Hello, I am new to looming and wonder about setting up my first project. I have a loom with 4 "shafts", or frames that hold the heddles. My first project is a plain interlock weave (no pattern and just one color). Can I use just 2 shafts instead of all 4? I am interested in getting as tight a weave as possible with approximately 16 threads per inch. Also, is there a technique for keeping the sides as even as possible as I create the piece? Thank you, any and all help is appreciated. I can't wait to get started.

Comments

aubeweave (not verified)

Hi Karilou, since you want to weave a tight weave I would prefere 4 shafts instead of 2. It gives more space to the warp in the heddles. Regarding the sides remember "what you give is what you get". Let the weft lean in an angle before the beat. Good luck weaving 

karilou (not verified)

Thank you, that is very helpful information and much appreciated. I will have more confidence going forward.

 

 

Joanne Hall

Hi Karilou,

If you want to weave a tight weave, you will need a temple.  Without the temple, if you beat hard, you will have more draw-in or narrowing of the width.  And then you will not be able to get as many wefts per inch as you would like.

You can read about temples at our FAQ weaving at:

http://glimakrausa.com/faq.html

Joanne

 

karilou (not verified)

Thank you Joanne, I will read about them as I have not heard of that term before. All of the advice is so helpful. Thanks again, Kari

Submitted by Anonymous (not verified) on