I am attempting to sell my 45" 8 shaft LeClerc Nilus loom because I have trouble reaching the pedals and weaving at the same time. Standing helps, but it is just not ergonomic for me (I am 5 foot even). I would like to replace it with something a bit shorter, 45"-48' wide with a minimum of 8 harnesses. Truly I would love an AVL but I worry that it will be too tall for me. Does anyone have any recommendations for a shorter loom?

Comments

webslave (not verified)

I'm also 5 feet even.  I had a 45 inch loom of unknown origin that my parents gave me and hated it because nothing on it "fit" me.  I bought a countermarche Glimakra vertical standard and love it.  It seems like such a loom wouldn't work for a petit person but I can walk around inside it, remove beams to get close to what I need to do (threading is at eye level), and believe it or not, I have no trouble reaching the treadles (the bench is adjustable) or weaving.

Joanne Hall

We have sold the Glimakra standard loom to weavers shorter than you are. One was 4 10 and the other 4 11. They both were comfortable treadling. The treadle cords are adjustable, so you can raise them. I also visited a very short weaver is Sweden who is a professional weaver and she had no problem. Tell us where you live and perhaps someone near you has one you can visit. Write to me at [email protected].  I will see if I can locate a loom near you that you can visit.   Joanne

Karren K. Brito

I had a Toika for a short peroid of time, 25 years ago that was difficult for me (5') but my AVL (bought in '87) has never been a problem. And I have an old Harrisville that is easy too.  I think that the benches can be more of a problem  than the looms, if the edge cuts into the back of my thighs and cuts off the circulation.... ugh! I have cut down benches, padded benches and do like tilted ones.

Try as many as you can before buying.

joydidit (not verified)

@Joanne - I will email you tonight. I know I will have to try before buying this time and I have to sell the LeClerc before my husband will let me buy its replacement. THank you all for the feedback and for letting me know I wasn't the only "fun sized" weaver out there that had this problem.

dweaver (not verified)

Have you thought about putting blocks on the treadles to make it easier to treadle?  One solution I use is to weave in sandals with one inch thick soles.

msthimble

Dear Joy,

An excellent topic.  I have an second hand Macomber, which I love as a nice surdy loom but I feel like I am reaching UP to grasp the beater- the result is that I feel taht I am lifting my arms up and over the front beam to get to the beater.  I end up with sore shoulders.

XO Gail & Fog

rigidheddlewea… (not verified)

I'm 5'2". Right now I have a small wooden box under my desk and at the movie theater and restaurants I have to put a baby booster seat on the floor for my feet to rest on otherwise I end up with lower back pain cos my feet hardly touch the floor if at all.

I have a 30" Murphy Counterbalance loom and I find that the breast beam comes to my...well...breasts and this leaves me with sore back (especially between the shoulders). Love the idea of getting a higher chair and putting blocks on the treadles...I'll have to try that.

toomany (not verified)

I have a 45" Nilus also.  I am 5'2".  The first months of weaving were very frustrating for me because I couldn't find a comfortable way to weave.  But with an adjustable bench and treadle blocks my husband made for me I am now weaving comfortably.  It took a lot of trial and error because it takes some time weaving before you know if each new position is good or not. (Everything feels fine in the first few minutes.)  You might already have your mind made up for a new loom but in the meantime of selling it keep experimenting.  The blocks made all the difference for me.  The Nilus is a great loom. Plus it's a lot easier to make the loom you have work for you instead of changing your loom.

toomany (not verified)

This is a picture of the blocks.  The blocks have 2 small holes drilled in the bottom and a ziptie going through each around the actual treadle.  Nothing is permanently attached to the loom inself.

 

toomany (not verified)

I just wanted to add that your bench and blocks should be adjusted so that when weaving your  elbows should be just above the breast beam with your arms about 90 degree angle and your legs should not over extend to depress a treadle.

Michael White

Gail, we have three Macombers and Cheryl is 5' 5" not tall but not again short. I not sure how tall you are but there are a number of things you can try. First remove the beater handle and add brocks to the beater arm or make a new beater handle so you don't have to reach so far. Put blocks under your bench to raise your self up. I have added an extension to the brake release so you do not have to reach way over to release the brake. If you need help with modifying your loom let me know.

Michael  

Michael White

A loom is a "tool"...... You can adjust your loom to make it more  comfortable for you to use. Start with the bench, the bench is the key to weaving. If you are not comfortable sitting at your loom your weaving will reflect this. Say to yourself, "what can I do to this loom to make it better for "me". When I make a bench for Cheryl I make it tall then cut it down to fit. One lady talked about her bench cutting into her legs. The front of your bench should have a rounded edge and should be padded. Think about what changes you would like on your loom and lets see if anyone can here can help you make this change.

Michael

joydidit (not verified)

I am at the point of diminishing returns with this loom. I have spent a lot of money and time making it workable and can only really use it standing up (I have tried different bench heights and I only comfortable standing). Every time I turn around I have to spend money on this or fix that. So now it is in great shape but I am resentful and angry every time I try to weave on it. I just can't face another modification (even though the blocks are a great idea) or any more time making it work. We never got along well and it is time to part ways rather than work out our differences. I know it will go to someone who appreciates it. (I feel like I am breaking up with a loom).

So I am looking now to try out the looms in my guild so I can find something that is better for me from the start and will require less modification to make it work for me. 

MaryMartha

Because you seem determined to change looms, see if you can't test drive a taller model.  It is a bit counter-intuitive, but designs like the Glimakra with a higher breast beam (33" to 35") and overhead beater provide a lot more options for adjustment.  It would mean perching up on a higher bench and playing around with treadle height and beater height.  I'm 5'2'', and still searching for the best fit, but at least I have a range of possibilities.

weaver-dyer (not verified)

For nearly ten years I had blocks taped to the treadles on my AVL CompuDobby Loom.  Only once did I have to replace the masking tape.  I no longer have the loom, but have an AVL Workshop CompuDobby Loom and also a 40-shaft CompuDobby Loom. Being short, I found the leg stretch when using the WDL was too great.  I experimented with various sized blocks attaching them to the treadles with masking tape. However, for some reason, the blocks slipped and the tape ripped.  When I found the right height, I attached the blocks to the treadles with two strips of double-faced picture-hanging tape.  It has been several years and the blocks are still in place. The 40-shaft loom has an electronic lift making it easy to place the foot pedal at a comfortable height.

joydidit (not verified)

I think that is a great way to test block placement. I have some wood and I may try that. Thanks!

Bonnie Inouye (not verified)

Joy wrote that she wants at least 8 shafts. I am 5'1" and I tried out a lot of different looms when I decided to move from 6 treadles (4 shaft LeClerc) to more shafts and treadles. On some looms with 10 treadles, it was hard for me to use the first or the last treadle while inserting a shuttle on the other side of the loom. The spacing of the treadles can be a problem for people with short legs!  This is one reason I bought an AVL loom. I have two treadles in the center of the loom where it is most comfortable and I do not have to lean over to use them. And I really wanted at least 16 shafts.

Bonnie

joydidit (not verified)

I have been thinking about an AVL but have been worried about the height. (I would love to have 16 shafts for my favorite gebrochne and historical weaves). However, I am realistic to know that I may not be able to afford used one and I do want something that will fit me better. I hope to run over to our Cultural Arts Center where Pat Bullen has a weaving program and to test drive a bunch of looms that are there to give me a better idea of what is on my list and what is not. Thank you for all of your great suggestions.

joydidit (not verified)

I test drove looms over the weekend. I think the Glimakra fit me the best followed by the AVL. So, I will start saving for a used Glimakra. Hopefully, my LeClerc will sell soon and I can get something that fits me better. Lesson learned - always test drive a loom model before you buy it!

Susan Harvey (not verified)

I have a Louet Spring 90 / 12 shaft and it seems to be quite friendly to vertically challenged folks!

My weaving friend had a Toika and struggled for some time and is now a very happy weaver with her Louet Spring. Perhaps a call to a Louet dealer might be helpful before you make a choice.

If you have your heart set on 16 shafts, there are choices to make with other Louet models

 

Susan

Submitted by Anonymous (not verified) on