I have a problem with my sides where the weaving on the two sides bows up. I et this frequently enough to know it is my warping skill or lack thereof that is holding me back. THe warp on the edges seems to be the same tension and I almost want to tighten the side but I don't think that is the right thing to do. I know I have other issues with the selvedge (the warp itself is a challenging) but the bigger issue is the rise of each side.

So what beginner mistake am I making? Thanks!

Joy

 

Comments

Ellen (not verified)

My immediate reaction to your picture is that what you see is draw-in. Perhaps you do not lay in enough weft (try a bigger angle) or you need to use a temple, which I find can be necessary with some yarns to keep the weaving width.

joydidit (not verified)

I have tried a poor man's temple (weights and pins) and I bubble the weft so I guess the next step is to purchase a real temple. Thanks for the suggestions!

Joy

joydidit (not verified)

I have tried a poor man's temple (weights and pins) and I bubble the weft so I guess the next step is to purchase a real temple. Thanks for the suggestions!

Joy

Joanne Hall

You might also tighten the tension on your warp.  It is hard to know what else to suggest without being there.  But a tight tension is very helpful along with using a temple.

Joanne

joydidit (not verified)

I have this happen enough I think it is a need for a temple coupled with draw in. Luckily I have a gift card I can use toward one. 

debmcclintock

when you use a temple you should move it every 1/2 inch to one inch as you weave, don't let more cloth appear between the fell line and the temple.  Your safety pin in your photo should have been moved 1/2 inch earlier.  It also looks like your warp was not wound evenly....always something to fix!

Submitted by Anonymous (not verified) on