Fringe twisting - before or after wet finishing? Thoughts? Opinions? Which way do you do it, and why? Does the fiber make a difference? I've seen it done both ways, and am wondering which might work better in given situations.

Comments

Amelia Garripoli (not verified)

I always do whatever fringe treatment I'm going to do, before wet finishing. Partly because I'm mostly working with wool when I have fringe. Cottons, I tend to do a rolled hem, and so far I've done that after wet-finishing, so there wasn't 3 layers of fabric for the water to work through at the hem.

Ellen (not verified)

When I do fringes I alway do them before wet-finishing. I have a fear the yarn would be too tangled afterwards to make the fringes all nice and orderly.

Dawn McCarthy

With most yarns I twist fringes prior to washing.  With wool I leave the fringe length plus an inch - weave 2 inches excess then wash and lastly fringe.  This is to prevent the wool from matting at the end of the fringe.  I dislike raggy looking ends!

 

Dawn

tien (not verified)

I do it before wet-finishing because it is far easier to keep the threads in order, and because it protects the threads from the wear and tear of washing.  For delicate yarns (rayon chenille in particular) this can be important.

However, if you wet-finish before twisting the fringe, make sure you leave some woven fabric at the end of each fringe to hold the fringe stable during the wet-finishing process.  That will keep the ends from tangling.

sally orgren

It's unanimous! I twist before wet-finishing too. Any and all fibers, especially slippery stuff. The reason is that the wet-finish process usually tightens the twist a smidge as the warp experiences "take-up." (I prefer that so the fringe lasts longer.)

Guiding Myth (not verified)

Well, I guess I have to be the contrary one.  I rarely finish the scarf ends before wet finishing.  To protect the fringe and keep it in order I don't cut multiple scarves apart and I braid ends (securing them with a rubber band) that are on the end scarves before washing.  

To my eye it looks better because the ends get a bit ragged otherwise.  Sometimes I am not sure how I want to finish them until after they are washed.  Things shift around during washing, I don't want any puckering.  Usually I hemstitch on the loom and decide whether to twist or not later.  I have made a lot of scarves and wraps with slippery shiny rayon warp - (50 or more) and those I just hemstitch.

The last scarf warp I finished I considered twisting before washing (because I have been reading that many weavers twist first - but couldn't bring myself to do it.  I am glad I didn't - it was tencel and the ends frayed - would have been difficult to cut them perfectly again afterwards.

Best wishes for the holidays!

Stephanie S 

 

handspunhandwoven (not verified)

Thank you all for contributing to this discussion. It's great to hear your thoughts and opinions, as well as your logic. I look forward to learning more from you all.

Learnernc

I would like to thank "Guiding Myth" for her detailed account above. I am new, and when I wet my first woven scarf, the fringe exploded, snarled, and twisted up on itself! I wanted the fringe to be a simple over hand knotted type. It was a mess. I now have some new ideas about how to prevent this mishap in the future. "
Submitted by Anonymous (not verified) on