I have two giant - maybe 5 lbs each - cones of yarn that I would like to use for towels.  The label inside the cones contains the following information:

cys ( or possibly c4s)

3/1 (huh?  I think I can unravel 4 plies)

cot 98/ poly 1/ lycra 1 (which I assume means 98% cotton, 1% each of the other fibers)

nat/nat (ok, two of the fibers are natural I guess)

multi nubs (there are red, green and blue little nubs of fiber plied into the yarn)

I get 30 wpi which is equivalent to Halcyon yarn's 8/2 homestead cotton.   But this yarn looks thicker to me.

Finally my questions:  Can I ignore the small percentage of poly and lycra and use this yarn for towels?  I plan on waffle weave.

Should I space the warp as if it were 8/2 cotton at 20 epi?

I really want to use some of this yarn - I must have several miles of it.

Thanks.

Gail

Comments

Joanne Hall

Although waffleweave is woven with 8/2 cotton in some references, it is about as thick as you would want to get, as towels woven with 8/2 cotton become very thick.  If the yarn is thicker than this, Your towels will be very, very thick.  I prefer waffleweave woven in a finer thread.  Our guild is doing waffleweave for their January project and I have cottolin, which is a hair thinner than 8/2.  For each cottolin warp thread, I have two linen threads, 20/2.  I hope to weave the sample this next week.  VAV magazine had a waffle weave project in their spring 2010 issue, woven with 16/2 cotton combined with 16/1 linen in the warp and weft.  It was on display at Convergence and I fell in love with it.  I hope to weave that one some day.

Joanne

laurafry

I'd also sample because that 1% lycra could easily activate in the wet finishing and you might find that your towels are not only way thick but way small, too.....

Cheers,

Laura

Joanne Hall

PS  you might try a short warp, just weaving this yarn in plain weave and see what you think. Then it won't be so thick and the specks of color might be too much pattern if you combine it with a threaded pattern.  Try some colored stripes in the weft with 8/2 cotton.  Sometimes we forget that plain weave can be beautiful.

Joanne

gailc

Thanks, Joanne, Laura and Michael.  Since this is one time that I am not in any danger of not having enough yarn, I am going to weave two sample towels - one plain weave, one waffle and see what happens.  I can always use them in the barn if they do not turn out as expected.

Gail

gailc

Joanne, several years ago I purchased a waffle weave holiday towel kit from Halcyon Yarn.  I finally wove them last week and washed them this morning. The yarn was their 8/2 cotton and I was somewhat surprised at how thin and light the towels turned out.  All of the waffle weave towels that I had done before were using 10/2 cotton and the waffle pattern from Handwoven's design collection.  The threading/treadling of the two projects was different, and I liked the thickness of the Handwoven draft better.  I was planning on using this unknown yarn with that threading/treadling but 20 epi instead of the 24 epi used with the 10/2.  Do you think that would be a mistake?

Thanks.

Gail

Joanne Hall

Hi Gail,

Since you are planning to make a sample, go ahead and weave one.  And let us know what you think.

Joanne

gailc

Exactly what I did.  I wove a sample 10 inches wide in the reed, 10 inches woven length.  On the loom, the width was 8 1/2 inches, drawing in like most waffle weave.  Off the loom, width was 8 1/8 inches, length 9 3/8 inches.  I soaked the sample in hot water, agitated it a bit and threw it in the dryer.  Finished width is 7 3/4 inches, finished length +7 1/4 inches. 

I like the thickness of the towels - not as flimsy as the ones I just finished, slightly thicker than the 10/2 waffle weave towels I have.  The change in sett for thicker yarn really changed the look of the weave - bigger squares are visible.

I tried stretching it to see if the small amount of lycra made a difference, but really dont know if it is my imagination or if the resulting fabric is stretchier than my other waffle weave towels.

Now I wonder about the absorbancy - how do you measure that?  By how much or how fast it soaks up water?  How well it dries a dish in one pass?  Could the "impurities" in the cotton make it not absorbent?  Should I wash in detergent to really assess this?  I hate to go through all the weaving only to find out that I have nonabsorbent towels.

Gail

Claudia Segal (not verified)

Hi Gail,

It would be great to see some pictures.  Have you added it to your projects yet?  There is a category for "weaving" in the project page and there is a detailed help topic HERE for entering projects and one HERE for posting pictures with your comments.

Claudia

Michael White

Try drying some dishs, if this works you are in business.

Michael

gailc

Thanks, Michael.  That is just what I did before I posted - I wet a clear glass corning lid and dried it with my little sample.  I thought it didnt do a great job, but my husband said it is fine.  I guess I will go ahead and put on a warp for 8 towels and hope that they get more absorbent as they are used and washed.

laurafry

This is often the case if the yarn is undyed - there may be naturally occuring waxes still in the yarn.  Scour with hot water and soap/detergent.

Cheers,

Laura

gailc

Thanks, Laura.  I was hoping that would be the case.  I didnt actually wash the sample, just agitated it in hot water and dried in the dryer to see how much shrinkage I would get.  I think I posted a project with two photos.


gail

Michael White

Yes. like Laura said you have to wash in hot water  to remove the sizeing used in the production of the yarn. The sizeing helps to keep down the dust (lint) from making the yarn. You know what lint you get just "hand: weaving just think of the lint made when the machinery is running at high speed. One note: do not use a fabric softern in the water. This will keep the towel from drying dishs.

Michael

Submitted by gailc on