I'm considering buying a 10 harness, 16 treadle loom (a nice used one) to upgrade from my starter 4h/6t loom.  It's a bit wider too.  Any special advantage to having the 10h/16t set-up?  Something great I can weave on it?

Jeannie

Comments

lkautio (not verified)

My big Macomber had nearly this set-up (10S and 18T).  10 shafts  allows you to weave two blocks of 5 shaft satin to make damask.  It also allows 8 blocks of many common structures rather than 6, giving many more pattern options. Motifs will be a little less pixellated than on 8S, curves will be smoother, etc. The extra treadles give you much more flexibility in designing.  There is really no good reason to only have the number of shafts plus two if you can fit more.  It will be especially helpful with tied weaves (such as summer and winter, half satin, quigley, bergman, etc.) and to make more varied twills and laces.  Go for it!

Laurie Autio

laurafry

What Laurie said.......it's why I love my dobby loom - I can design block weaves with huge repeats in the treadling and not run out of treadles.  :)

Cheers,

Laura

Joanne Hall

Hi Jeannie,

If the loom is a Macomber, or a jack loom from another maker, one of the advantages is that the shafts will each be lighter weight.  A friend had a four shaft, 40 some inch wide Macomber and after having a problem treadling, she weighed one shaft and it weighed 6 lbs.  But, I have heard that when the loom has a lot of shafts, they are lighter weight.  This would vary depending on the number of heddles it has. Maybe someone with a Macomber can fill in more information.  This may also be true on other looms as well.

If it is a jack loom, you might weigh one of the shafts and then decide what it will be like to lift half of them. With a Macomber, the treadles are attached in the back, so there is better leverage for treadling.

Joanne

Jeannie (not verified)

Thanks for the very helpful replies! 

Damask is something I have always wanted to weave, as is summer and winter.  (I am particularly interested in historic textiles.)

I hadn't considered the weight advantage of the extra shafts and treadles, but that is probably the thing that tipped the balance towards buying this loom.  Mind you, I was already leaning that way.

Jeannie (not verified)

Thanks for the very helpful replies! 

Damask is something I have always wanted to weave, as is summer and winter.  (I am particularly interested in historic textiles.)

I hadn't considered the weight advantage of the extra shafts and treadles, but that is probably the thing that tipped the balance towards buying this loom.  Mind you, I was already leaning that way.

lkautio (not verified)

Joanne, I think the Macomber lighter shafts come with the wider looms.  They were not on my 40" width, but I believe they are on the 56"+ widths.  You do get used to the free gym hours and develop the Macomber "thews of steel."

Laurie Autio

Jeannie (not verified)

I bought the 10h/16t loom yesterday and it's coming to its new home on Saturday.  Very exciting!

Claudia Segal (not verified)

Congrats! that's great. Keep us poted and send pictures of your with the new loom.

Claudia

Submitted by Anonymous (not verified) on