Hi to all Weavers,

I haven't figured out yet how to do the threads on my loom, a friend of mine told me what to do for my first project,, well I have another reed, and would like to make some dish towels.  It is a ten dent reed and I would like to make my dish towels 18 by 24.  How would you figure how many threads per dent?  I am just using cotton thread. Thanks Toni

Comments

Claudia Segal (not verified)

Hi Toni,

What books do you have for reference help?  Deb Chandler, Peg Osterkamp, etc. all have good detail and forms in their books which might be easier than trying to describe it here.  Weavolution lost our Weaving calculator last July when it demonstrated some major instabilities.  Do you know what size cotton you have?  3/2 or 5/2 or 8/2?  They all require different sett.  What are you making, plain weave or twill?  

You may want to browse the Topics in Weaving 101 for more information.

Claudia

Begin weaver (not verified)

Thank you, I will have a look see and check out the books.

laurafry

How many ends per inch you have will depend on the grist (thickness) of the yarn you are using.  If you don't know the count (size) take some of the yarn and wrap it tightly around a ruler for one inch, pulling some tension on it as you do and laying the threads side by side as close together as you can without overlapping.  Divide the number of wraps by two for plain weave.  If you want to weave a twill, increase that number a little.  e.g. if you wrap 20 threads in an inch, you would set your thread at 10 epi for plain weave and 12 for twill.

If you wrap 40 threads in an inch you would set your cloth at 20 for plain weave and 24 for twill.

That is, of course, if you are using the same size thread/yarn for weft.

Cheers,

Laura

mrdubyah (not verified)

If you have a 10 dent read, then you are most likely looking to use a set of 10 threads per inch.  For an 18" towel you would therefore need 18inches x 10threads per inch = 180 threads. 

If you want to make 4, 2 foot (24") long towels, then you'll need at least 8 feet of warp length, plus a foot or so more for space between the towels, and up to 3 feet of loom waste. That adds up to 12 feet or 4 yards in round numbers.  

Therefore you probably need 180 threads of 4 yards each making a total of 720 yards of warp.  Does that help?

Michael White

Question, why are you leaving a foot? Here you can see hundreds of towels www.handweaver.us the distance between towels is only 1/8 inch, two weft threads as a cut line (contrasting colour). So 4 towels will be 3/8 inch.

 

Being Weaver, one thing you need to keep in mind is shrinkage. If you want a towel a certain size you must weave it oversize. If you are weaving say 8/2 unmer cotton, every yarn  from different cones you use in the weft/warp will shrink different. It may all be 8/2 cotton but every thread will shrink at an inconsistent rate. This is something you will learn to live with if you are using "natural" fibers.

Michael

Michael White

Toni, here is a follow up on my posting on shrinkage. 8/2 cotton means the yarn in made up of 2 # 8 size strands of fiber or a 2 ply yarn. Shrinkage is determined by a number of factors going into mading the yarn. Some of the factors are: staple length and fineness of cotton fibers, (RS) Ring-Spun, (OE) Open-End Spun,  S & Z twist, (D) Direct Dyed, (R) Reactive Dyed. Other factors are the cloth structure (plain weave, twill etc.), beat of the yarn(the harder the beat the denser the cloth will be), weather(Yarn will take up room moisture  and room temp.) The last factor is in wet finishing, water type (Hard-Soft) and water temp.

Class dismissed,


Michael

 

Begin weaver (not verified)

You are all so helpful!!  Thank you so much.

Submitted by Anonymous (not verified) on