I have just completed my first double weave project, and wondering how all of you finish off the ends.  I didn't want fringe on the ends of this project, so sewing of some sort is in order.  If I fold it over, as I would on towels, it seems that with two layers, it would be too thick.  Also there is the problem with color.  A fold over would put the wrong color showing on one side.    I would like to hear how you finish your double weaves.

Comments

tommye scanlin

Beautiful design!  One way to finish double weave would take advantage of the two layers--weave separate cloth for maybe an inch and a half to make two sort of "flaps".  Turn these back inside and hand stitch to close the end and the sides of the hem.  The fabric will be double thickness there, of course, so maybe that would be too thick for your liking.  But each side would be the same color.

Aunt Janet (not verified)

I wish I could help.  I rolled my double weave rug, making a very thick lip at each end that i don't like much.  I would weave a thinner header and finish that way on a future double weave rug.

Your runner looks great.  I am looking forward to hearing finishing techniques from some of the great, experienced weavers here.

 

Bonnie Datta (not verified)

Often when I want to do a special finish I use one of the rug finishing techniques described by Peter Collingwood.  Many of them have the effect of securing the warp and at the same time turning it so that when it is trimmed the fringes face toward the textile.  So in the case of double weave they would be sandwiched between the layers.  There is very little added thickness as the ends can be clipped quite short and they are loose so they meander a bit and break up the cut line.

The various techniques are well illustrated, and quite simple once you get going.  The key is tension, and I find that putting the textile on a TV table then putting a 20 lb. weight on it is the best way.  If you get your tension right the edge will be even, not rippled and not pulling in the selvedges.

With wool, I trim quite close before wet finishing, and the little fringe ends weld together and create a velvety line that I usually put on the outside of the piece as I like the look of it.

Bonnie.

 

tomrsey (not verified)

Thanks for sharing your ideas.   I appreciate the time it takes to respond.  Some interesting techniques were mentioned.  I think I will fold the ends in and stitch for this project.    The next one may have fringe, or that "velvety line".   

Submitted by Anonymous (not verified) on