Can anyone help me tie -up a Harrisville T6. Need to replace the leather harness tie-ups.Has roted and fallen apart so I don't know how it was tied to the lamms and the harnesses. If you can show me some pictures it would help,  but a written discription will help a lot. Asked Harrisville for help, but they now charge you just for info. on how to put THEIR looms together. PLEASE HELP ME!..........Steve.

Comments

Sara von Tresckow

Check with Harrisville - it costs them a lot to offer advice on years and years of loom models, but they know their product better than "just somebody".

Free is not always better.

claudia (not verified)

Wow, Harrisville charges for help with their own looms.  That may be good business practice but not very friendly.  It certainly doesn't encourage me to own one.

Steve, can you post a couple pictures for people who may not have that loom but have lots of good general loom knowledge. 

Claudia

steve104c (not verified)

I was going to replace some parts by ordering from Harrisville. But if I can't get a little info. on their loom without having to pay for it, I'll save several hundreds of dollars by making my own parts, and I can , and they will probably be better than original. It's their lose.  I have been making furniture for about 28 years and have every tool needed. I was going to make a rug loom before Michael hooked me up with my Glimakra I have now. I understand a business has to make money, but there is a limit to what you should charge for. I'm at work right now and unable to down load a picture. I'll have to do it tomorrow.Thanks.........Steve.

sequel (not verified)

It's not hard to do.  Order the cables from Harrisville.  The two ends with loops hook onto the harness hooks, then over the rollers for that harness and down the sides.  The end with only one loop and a ferule hook up to the chain end that come up the side from the treadles.  Then you adjust the cables to balance the harnesses and slide the ferule down toward the bottom loop to secure it. 

Submitted by Anonymous (not verified) on