My project is bookmarks with alphabet letters. The instructions are written well, but the project is giving me fits. It is point twill threading on 4 shafts enabling me to do a border, background tabby, and letters using a pick-up stick. I alternate rows of tabby and pattern. This is all new to me and must I remove the stick every time AFTER I weave the pattern pick. I'm not so sure this project is for a novice weaver. Since I must make 9 of these bookmarks for my stitch group I thought it would be quick and easy for me, I'm having doubts. Any suggestions would help. Donna

Comments

laurafry

Yes, if you are alternating plain weave and pattern picks you must removed the stick after each pattern pick has been woven.

Cheers,

Laura

claudia (not verified)

Do you have enough room behind the heddles to push the pattern stick back on top of the back beam and out of the way?  Do you get a clean shed when you do that?  

I have worked with a pick-up stick and a rigid heddle loom and you just need to push the stick all the way back on the back beam and you get a clean shed and pull the stick forward when using it.  You would need to check your sheds when the stick is pushed back and see what happens

Anything using a pick-up stick is slow going.  It's not really challenging, requires being very exact if you remove the stick.  You need to pick up the threads correctly each time.

What size threads are you working with?  3/2? 5/2? smaller?

Claudia

MaryMartha

This is a naive question, but if leaving the pickup stick pushed back behind the shafts won't work, might using string heddles to record the pattern pick be an option?  You'd still insert the pickup stick each time tp open the shed, but the heddles are there to "remember" the count and speed up the process.

MaryMartha (who still hasn't bought a floor loom)

claudia (not verified)

If the pick up stick is laying flat behind the heddles and pushed all the way back, it should not interfere with the action of the heddles.  You might get a smaller shed but you should still be able to raise the shafts (and lower) with it in and pushed back.

I'll have to try this and then come back to it once I've had a chance to play with it on my loom.  I have used a pick-up stick on the rh loom several times and never had any problems but a floor/table loom is different. 

I'll be back,

Claudia

Sara von Tresckow

Pupsshing the pickup stick behind the heddles only works if you have only one pickup shed. If you are doing a pickup "pattern" like a letter of the alphabet and are doing several letters, then inserting the stick every other shed on the patterned parts is what you do. Half heddles are also only good for repeating motifs.

debmcclintock

when I learned to weave it was on a rigid heddle loom, I could control every thread (sorta like the backstrap).  Loved it!  I was really annoyed when I went to a treadle/shaft set up and learned that I had lost that thread for thread control.  Then I was REALLY annoyed when I figured out that I couldn't leave my pickup stick in but had to pull it out for each shot.  

What folks have suggested works well if you have room between your shafts and back beam to push your pickup stick behind your shafts (there are ALOT of different loom configs).  String heddles or half heddles work also if you have room in your warp path to hang them.  You are walking a path many of us have walked.  It takes patience and understanding what your loom can do and how you can break the rules to do what you want to do.  And sometimes you have to accept that your particular loom just cannot be modified to do what you want to do.  Really, sometimes infrastructure gets in the way.  I think alot of the infrastructure we deal with on looms today is based on production needs.  If you look at earlier looms or village based looms you see that they rely more on weaver/warp interaction without "loom assist" devices.

This will not help you on YOUR project NOW but I'll be posting something on my webpage to show how I modified my loom to store pickup based on what I learned from the Lao.  Here is a link to a project I just finished that shows you what I could do with it.  I'll post something here in Weavo when I finished that part of the webpage.  

Probably way more than you needed, I apologize, but this is something that is near and dear to my heart.  Regards Deb Mc

claudia (not verified)

I tried leaving the pickup stick in on my Glimakra Standard and Deb and Sara are right, their advice is good.  On a rigid heddle loom, leaving the pickup stick in is much easier than on a floor loom.  I tried and it was far more work than it was worth.  Taking the stick out and replacing it looks like the best choice for you on this project.

Heading to Deb's webpage to check out what's going on there.

Claudia

d chafin (not verified)

Thanks so much Laura. It's a good thing I'm starting these bookmarks now so I'll be able to complete them by the holidays. My stitch group exchanges Christmas gifts, which can be anything, but I like to give them a handwoven item.

d chafin (not verified)

Thanks for your input Claudia. The thread I'm using is 10/2 background, for pattern 10/2, 8/1, 5/2. These bookmarks will be gift exchange for eight of my fellow stitchers so I want their initials to be different colors. Since there are no weavers in the group I like to give them something handwoven. We all knit, some better than others and some cross stitch, quilt. A real special group of ladies here in Colorado. Last year I made them knit felted handbags. Thanks again I'm planning to try your suggestions this weekend. Donna

d chafin (not verified)

Thank you Sara. Donna

d chafin (not verified)

Your comments were so helpful for me and I will now check out the link and your web page. thanks for taking the time to respond to my frustration with weaving these bookmarks. Have a great day, Deb. Donna

loomyladi (not verified)

I'm intrigued by the possibility of adding letters to a piece on a 4 harness.  Would you be able to recommend a resource that would give me the instructions? 

I am wanting to add a simple phrase at the end of a scarf.  I'm using 8/2 tencel and would like the letters to be about 1/2 - 3/4" tall.  My finished width is 9.5" although I can adjust this if needed. 

HEADRTNSL are the only letters I need to create. 

Any thoughts?

Submitted by Anonymous (not verified) on