I bought a Glimakra band weaving loom at Black Sheep Gathering a couple of weeks ago.  They shipped it.   I assembled it and began weaving.  My first band was a striped tan and kakhi 1/2" in 10/2 cotton.  Second band was another simple pattern w/o pick up, 1 1/2" wide.  I have run into a pretty serious problem with the loom.  This loom has a rachet to hold the piece tight.  I do like to have it tight, but I may want it tighter than the loom is designed to go.  I'm not sure if I have worn out the aluminum piece in just two bands, or if it is set wrong.  The piece that sits in the ratchet is straight up and down and has no purchase on the ratchet.  I can't tighten it enough.  It will jump clean off the ratchet.  I'm calling the Glimakra distributors I purchased from on monday to see if I can replace parts.  This is sure disappointing, because the loom works great otherwise.  I was able to weave quickly, using a little round shuttle I whittled.  That is I was weaving quite quickly before the difficulties began.  Darn, I really wanted to start on another band.

 

 

Comments

dtjacobson

Whoo-hoo! Congratulations on the new loom. I saw those at BSG and nearly succumbed (only the thought of a new weaving bench saved me). Besides, I have a perfectly good Cendrel.

Inkle, by its very nature, should have a taut, but not tight warp. Inkle is warp-faced, so there needs to be just enough slack to allow the weft to be the tighter thread, forcing the warps up or down. It seems to me that the warp tension on my inkle is a bit less than the warp tension on my floor loom.

Call Johanna at Glimakra--she's really nice and can probably diagnose what the problem might be.

Aunt Janet (not verified)

They sent me a new side with pall and ratchet.  I haven't rewarped yet.  Busy, busy.  I do want to get back at it.  Love inkle weaving.

Loominaria (not verified)

 I bought one of those from Glimakra and they originally sent me two left sides.  They sent a pair of sides to replace my lefties to make sure I had two that faced each other properly, but I haven't assembled it yet.  Maybe Friday.  I hope I don't have the same ratchet problem and no more incorrect parts.  It looked quite fun on the youtube video.

Marsha A. Knox (not verified)

I learned how to weave on a Tapestry (Mirrix) so I tend to be heavy handed when I weave.  As a result when I got my Kromskiu Rigid Heddle loom I was constantly plagued with the ratchet popping loose.  What a mess, had to scrap a couple of projects.  To cure this problem I just use a c clamp from the hardware store and clamp it tight.  I don't do much in the way of drape-able fabric, mostly weft faced, i.e. tapestry, as this is my comfor zone.  I have discovered that I can indeed get a fine weaving, drape-able, if I use fine setts and yarns.  I rarely use my RH any more.  Hardly ever been used and would like to find a home for it.  Am open to trades, its a 32 in with 2 10epi heddles and the stand.

Submitted by Anonymous (not verified) on