Hi,

I am thinking about purchasing a Leclerc 'Nilus' Table loom but I am having a hard time finding information about it.

I am brand new and I would hate to waste my money on something that I can not use.  So any help would be appreciated.

http://ottawa.kijiji.ca/c-buy-and-sell-hobbies-crafts-Leclerc-Nilus-Table-Loom-accessories-W0QQAdIdZ216471549

This is the link to the item.  Just copy and paste.

Thanks so much

Cathryn

 

Comments

Joanne Hall

Hi Cathryn,

There have been many of these very small table looms sold over the decades.  They were designed to be very portable for taking to guild workshops.  They fold and are very small.  If that is what you plan to do with it, then it is a portable loom and a low price.

But, if you want a loom to weave on at home, to weave projects, consider a loom that is a little longer from the front to the back. The Dorothy table loom is only 20 inches deep so that it is very portable.  But for weaving projects, look for a loom that is deeper, 28 or 29 inches is better.

Joanne

opal65ca (not verified)

Thanks Joanne for the response.

I only want to make shawls and scarfs, would this be okay?

Thanks

Cathryn

CraftinSusan

I purchased a 2S LeClerc Nilec 15 3/4 inch table loom used.  It was missing a handle so I contacted LeClerc.  They responded very quickly with information about the handle and that I could buy it from them.  They also have information/manuals about all their looms on-line to download including looms they no longer make.  So they will give you lots of support in getting additional reeds, heddles or anything else that you would need for this loom.

Joanne Hall

Hi Cathryn,

Yes, Leclerc has a lot of information on their site and they are very helpful.  The 15 3/4 in weaving width is fine for scarves, but a bit too narrow for shawls.   You will get an inch or two of shrinkage in the width. 

Sometimes whether you purchase a loom depends on the price of the loom.  Balance that with your objectives.  Joanne

Karren K. Brito

For $100 you can't get much in a new loom ( the Leclerc rigid heddle loom is $265), here you have a loom and a Harrisville warping board.  You could print a parts lists from the Leclerc website and check that they are all there when you purchase it.  But even if a piece is missing and you have to buy a new piece or two it is still a bargin.  You can start on it and as you grow you will figure out what might be a better loom for you. 

PS.One of the reeds looks like it might be rusty.

opal65ca (not verified)

Thanks to everyone for their opinions.  Could someone tell me what the name of this loom is?  I have tried to look on the Leclerc site for information but I don't know which one it is.

I have also negotiated with her and she will sell it to me for 75$.

Thanks so much.

Cathryn

CraftinSusan

Although it says Nilus, the loom looks more like a Dorothy loom.  What is the width of the reed?  If it is around 16 inches or slightly less than it will be easy to get additional reeds.  It looks like it has four shafts like a Dorothy.  The handles are identical to my Nilec 2S loom but that is what came on the older Dorothys.  For a 4S table loom plus warping board, $75 is a good price.

opal65ca (not verified)

Would leclerc have a parts list and how to set it up?  I am so new, that all is confusing to me.

CraftinSusan

Yes, LeClerc has all that and it is available for free download.  Just go to the LeClerc website and scroll down until you see Parts.  Click on that and the select Dorothy.  You will get a PDF file.

Jerri S

I'm just going from my own experience of trading a newer 16" Dorothy for a 22" older Dorothy, which turned out to be a Meco. The Meco needed some tuning up, and once that was done, wove like a little dream.

Pauline Klein (not verified)

I have a Leclerc Artistat folding loom.  and I love it.   I didn't really know what I would be doing when I bought it and it has turned out to be versatile for me.   A table loom is great for workshops and sometimes I wish I had one, but a floor loom will give you much more versatility over time.  You may find that like most weavers, your priorities and what you find fun to do will change and a floor loom will accomodate change better than a table loom. Good luck with whatever one you buy and welcome to weaving...it is wonderful.

 

Submitted by Anonymous (not verified) on