I'm new to Weavolution and to Weaving.  I took a class early in June and have fallen in love.  Because of a busy family schedule this summer I've been slowly making my way through my first project (6 tea towels).  I'm finally on the last towel and I'm trying something new: two weft colors. 

 

My question is:  each time I change colors I have to cut the thread.  Is that the right way to do that?

Comments

Threshkin (not verified)

Deb,

You could carry the unused colors up the side of your weaving as an extra selvage thread.  But I personally find it much easier and quicker to cut the threads.

Unlike knitting cut threads in a woven piece are (usually) no problem.

Erik

lkautio (not verified)

It depends on how often you change colors. If you are alternating them you don't cut each time, just use two shuttles. Usually it looks ok to carry the second color a few picks up the side, but not too far. Laurie Autio

debmcclintock

DebD, are you using a particular book in your new journey for reference?  Somewhere they should address "laying" in cut threads.  If you tell us what weaving books you are using for reference maybe we can find a page to refer to.  You did not say what sett you are working at but I am guessing between 12 and 24.  If your color jumps for a couple of inches don't carry it on the side, lay it in.  For that sett you can lay in the color that you are discontinuing for an inch into the warp thread and overlap the other color on it.  Use your eyes and your judgement to adjust this overlap accordingly.  Trust your judgement. It is much easier to lay in the threads on the loom than needleweave them later off the loom.  You can snip the loose ends after you wash the towels and they will stay in place.  Welcome to our world.  Deb Mc

Submitted by Anonymous (not verified) on