(I am cross posting this from the WeaveTech Yahoo group in hope of getting more responses.)
I am designing a double weave weave structure where one layer will be plain weave and the other will be a 14 shaft twill or crepe weave structure.
I am trying to decide how to set up the sett for each layer. The easiest approach would be to use the same sett for each layer but I am afraid that would either make the plain weave too dense or the twill layer too sleazy.
I want a fairly tight weave structure because the finished product will be used as a yoga mat. I will weaving closed end tubes with inserted padding.
The warp and weft will be 10/2 cotton. I warp front to back.
My thought is to use a sett of 18 to 21 for the plain weave layer and 26 to 30 for the twill or crepe layer.
Is this a good idea? If so, should I sley and/or thread each layer separately?
Or should I give up and move to a four shaft twill for layer 1 and a 12 shaft structure for layer 2? Then I can use the same sett for both layers.
The thought of laying out multiple setts in my weaving software is making my head spin. I use Weave Design which is pretty simplistic. I have an evaluation copy of WeaveMaker but am not familiar with it yet.
Comments