I am weaving some towels?? with a 5/1 linen of unknown age and origin.  It is a very rough spun linen with slubs, and stems etc.  I am using CUM 4/1 tow linen for the weft in a herringbone. The fabric is pretty, especially in the reverse treadling, but there is a lot of fluff coming up (I used a 10dent reed rather than a 15 to avoid too much abrasion). Will this fluff and fuzz go away when I wash the fabric, or am I making some really pretty burlap sacks?

Thanks for your input,

Cheryl

Comments

laurafry

Hi Cheryl,

No doubt you will get a *lot* of lint out of the cloth when you wet finish.  You might find compressing the fabric while it is still damp will help - either a hard press (using the iron on low heat), or a cold mangle.  You can cold mangle using a rolling pin.  I think I've still got the cold mangling video clip on my website http://laurafry.com

Cheers,

Laura

sally orgren

When my hubbster sees a project like that on my loom, he calls it weaving "gold into straw."

Karren K. Brito

Cheryl,

I wove this project with a bit of that kind of linen, http://www.weavolution.com/node/8019.  I love this kind of trashy linen singles.  The table runner was mostly white and it looked like it had snowed around the loom.  But two washings and most of the trash is out of the yarn. The natural colored yarn seem to shed longer than the white, I suppose the white was more processed (bleached) than the natural.

From Fairchild's Dictionary of Textiles:

                 Burlap  A coarse, plain weave cloth made with single jute yarns.....

 

I think burlap is in the eyes of the beholder.

jemwork (not verified)

You runner is lovely & will only get better after each washing.

sequel (not verified)

Wow, now I know what to do with all that tow linen yarn I picked up at guild giveaways in the early '80's! 

Actually I used a lot making "Virginia Cloth", a 17th & 18th century cotton/linen domestic product here in, you guessed it, Virginia.

 

 

laurafry

You might find that you have less 'trash' around the loom if you use something less linty for the warp and just use the tow for weft.

Cheers,

Laura

Michael White

As a follow up the towels are finished and have been washed.  They have softened and improved tremendously.  they are still a little fluffy, but I plan to give them another wash and then a hard iron, and I think I will be pleased with them.  Here are some pictures, of them on the loom and after washing.

Cheryl

Submitted by Michael White on