I don't know why I always want to do things that seem impossible.  Or at least complex and difficult.

I usually weave on an old floor loom, but I like to bring my little rigid heddle to shows to demonstrate the weaving process.  I've done a variety of projects on it, all of them successful, using plain weave, leno, brooks bouquet, and others.  

For my next project, I'd really like to do some plain weave on 18 EPI.  I tried to order an 18 dent reed for my loom, only to find out that no companies make an 18 for rigid heddle.  

First I figured I could have someone near me make me one out of wood.  But when I examined the reed, I figured out why -- in order to have enough of a hole to get a heddle hook through, there would be precious little material on both sides of the hole - not enough to make it durable.

Then I figured I could lash my 6 dent and my 12 dent together to get 18.  That made so much sense till I temporarily lashed them together, only to find out that it really doesn't give you an 18 - the slits and holes don't line up in a way that makes it work.

Never one to give up easily, I thought I'd come to you, the most experienced & helpful weavers I know -- have any of you solved the problem of weaving at 18 EPI on a rigid heddle loom?  (FYI, my loom only has one heddle, not two like some of them.)

THANKS!

Peg

Comments

tien (not verified)

Use 2 9-dent reeds (if there is such a thing).  Leave them separate from each other, but treat them as a single unit when it comes time to weave.

That's the way I've heard recommended, but as I don't have a RH loom, I can't say for sure.  I don't think it would work with a 6 and a 12 - dent reed, but you could always try that if you don't have 2 9-dent reeds.

Let us know what happens!

Tien

Joanne Hall

You can use 2 size 12 heddles, which gives you 24, but if you skip some holes and slots, you will have 18.  Actually it will be just a little more than 18 as the size 12 heddles are really closer to 13.

Joanne

Sara von Tresckow

 You can always use a rigid heddle with heddling bars like you find on simple frame looms. You put the correct number of threads on the loom, make a continuous string heddle for lifting and space the threads at 18 per inch. You wouldn't use a rigid heddle at all. It would be more like weaving on a warp weighted loom with shed sticks.

Beating is accomplished by pressing the weft in using the side of the stick shuttle. If spacers were used to achieve the 18 epi at the beginning, you should be able to control the width as you weave.

CraftinSusan

Betty Davenport in her book "Hands on Rigid Heddle Weaving"  talks about how to use two heddles to get different EPI.

In your case you would use two 12 dent heddles at 1.5 to get 18 EPI.  On page 99 of her book she shows you how to warp your heddles.

Caroline (not verified)

Sara's suggestion, with the string heddles, is the quickest to learn and do in a short period of time. I would make the string heddles for both sheds, using the continuous string heddle method, rather than struggle with learning the double heddle technique, then all you have to do is lift one shed, then the other. A sword or batten takes care of pressing the weft into place. Otherwise you can just use the one string heddle, with a dowel or batten in the other shed so its easy to find.

This technique also makes a great introduction to pick-up techniques.

Hope this helps, Caroline

claudia (not verified)

 I would use a 12 dent heddle and thread it for 18 by putting 2 threads in every other hole-slot pair.  That way you are increasing the number of threads by 50% which Betty Davenport also discusses doing in both of her books.

Good luck and let us know what you do.

Claudia

peg.cherre (not verified)

Since I don't have two 12-dent heddles, that method's out for me (unless I buy another one, of course).  

Where can I find the directions on how to make & use the continuous string heddle method?  I did see one video on YouTube, but she was using individual heddles, not continuous.

Caroline (not verified)

Using a 12 dent heddle for 18 ends could be problematic if you are using it to change sheds on a plain weave pattern. It will destroy the pattern you are doing. It could also leave marks on a fine textile if you are only using it as a spacer/beater  (in which case you will be making continuous string heddles).

Continuous string heddles have been very thoroughly covered on the Backstrap Weaving Forum here:

www.weavolution.com/node/6234

and

www.weavolution.com/node/3869

I found them a bit intimidating the first time I did a multiple harness pattern, but for plain weave, if you take your time, its quite straightforward and much easier than pick-up!  I like how you can change patterns half way through a piece by rethreading the sheds.

 

Submitted by Anonymous (not verified) on