I just posted this question under a previous thread.  I've removed the sectional beams from my warp beam and now need to know how to attach a beam stick.  (I'd prefer not to use a cloth apron.)  Are there pictures on the web someone can direct me to?  Or can someone give me simple directions?  (I wasn't a Girl Scout, so my knowledge of knots is fairly limited.) 

Thanks so much,

Monica -- a novice weaver

Comments

laurafry

As usual there are a number of ways this can be done.  Most commonly holes are drilled in the beam and a sturdy cord threaded through the beam making loops of cord that hold the bar.  You could also buy Texsolv cord which has evenly spaced 'eyes' and staple lengths of this cord to the beam inserting the rod into the same eye hold of each cord.  

If you don't have a handy person to drill holes for you, I think I'd go with the Texsolv cord and staple it (or in some way attach it) to the beam.

Cheers,

Laura

Monica Bellas (not verified)

Thanks, Laura.  The warp beam on my Leclerc Fanny has holes drilled for the sectional beams, but that's it, and none of the holes go all the way through to the other side.  The Texsolv cord sounds promising; I'll have to check and see if we have a staple gun. :)

Monica

laurafry

The biggest thing to remember is to keep the cords all the same length and position them at exactly the same place along the length of the beam.  Fanny looms generally had aprons so that's probably why there are no holes drilled all the way through.

Just curious why you don't want an apron?

Cheers,

Laura

Joanne Hall

We have drilled holes in Leclerc beams for attaching beam cords.  Be aware that it is very hard wood.  And do not drill in the same places that the sectional beam is attached.  I used to use aprons as I had Leclerc looms in the 70s and I was accustomed to them.  But I found that they stretched in the middle.  So, for the wide looms I made narrow aprons and got shorter rods.  Then the wide apron was wrapped all the way onto the beam before I tensioned the warp.  But the original apron stretched in the middle after a few years of weaving.  So, I use beam cords.  They don't collect lint like the aprons do.  I got tired of vacuuming them.

Joanne

Monica Bellas (not verified)

Laura --

I don't want to use a cloth apron for the very reasons that Joanne listed.  I would rather weave than vacuum. :)

Joanne -- would using staples be sufficient to attach the cords?

Thanks,

Monica

laurafry

I hear you about vacuuming.  :D

Cheers,

Laura

Joanne Hall

Hi Monica,

I would drill the holes.  I would not be happy if a staple failed.  And that wood is so hard that the staple gun would probably not work.  To put the canvas aprons on they send small tacks with very sharp points.  So, I would be more comfortable with the holes.

Joanne

Monica Bellas (not verified)

Thanks so much, everyone, for the help!

Monica

Submitted by Anonymous (not verified) on