Hi all,

I'm six feet tall and am having a bit of an issue with being comfortable weaving on my Fanny. No pun intended. When I sit at the Fanny my knees rub against the cloth on its way to the cloth beam. Two questions about this. First: While uncomfortable, how damaging is it to the cloth to do this? Second question: I'd like to try different benches. Does anyone have a review or opinion on these two inexpensive benches:

http://www.artfire.com/modules.php?name=Shop&op=listing&product_id=986756

or

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200483583181&ssPageName=STRK:MEWAX:IT#ht_1729wt_934

I'm not currently using a weaving bench but have tried several chairs that I have around the house that I'd hoped would work. I'm hoping that a weaving bench will solve the height and comfort issues.

As an aside, after reading about all the ergonomics involved in weaving, I'm thinking I might be comfortable standing while weaving. I couldn't do this on the Fanny as I'd be hunched over. Does anyone stand while weaving? What loom do you use for this?

Comments

ruthmacgregor (not verified)

I don't own a loom bench, either -- but I have some experience with weaving while standing.  A few years ago I hurt my, um, "sitting mechanisms" by meeting a difficult deadline while seated on a broken office chair (didn't find out it was broken until later). The result was that I couldn't stay seated comfortably longer than ten minutes -- for the next six months.

During that non-sitting period, I wove on two of my looms:  a rigid heddle loom equipped with a stand (just barely high enough to work on while standing, but possible), and a Louet Kombo with floorstand, which I mounted onto "risers" to raise it to a good weaving height.  The Kombo was so nice to work on from a standing position that I haven't taken it down off its risers!  The web is 42.5 inches above floor level, which hits me just a little above the waistline while standing (I'm 5'6", with long legs).

Weaving while standing isn't just acceptable, it's nice.  It would certainly be different if weaving on a loom with treadles -- but on a loom without, the weaving is a sort of dance.  Your whole body moves with in time with the weaving:  the shed openings, the shuttle throw, the beat.  It's quite pleasant.

I hope you get good feedback on the benches -- but in the meantime, know that weaving while standing is also an excellent option.

Ruth

ridinteacher

I don't use a bench while weaving.  I weave rag rugs on a Union 36.  I'm short  (5'3").   I can't imagine how it would all work if I was sitting.  Standing I am right over my work, I can reach the shed opening to throw the shuttles, and I'm up and moving around getting shuttles, advancing the warp, checking tension, etc.  If I sat, it would be alot of up and down.

After about 4 rugs in a row, my feet do start getting tired, but usually by that time, I am ready to move on to something different anyway.

Sara von Tresckow

 If you look at standard European counterbalance or countermarche looms, you'll find a KNEE BEAM that keeps the cloth off the weavers knees. Perhaps you could put something like that on your Fanny.

The best loom benches are the simple adjustable ones that come with the CB or CM looms from various makers - you can find photos on many web sites. If that doesn't work, weave standing. I do for knotted pile, rugs, table looms - sitting on a bench and adjusting everything without getting up is a frequent wish that just isn't really a reality.

 

feltedbag (not verified)

I want to get an adjustable drafting chair, like the one used by CuriousWeaver.  I have an adjustable desk chair that I use when I'm threading the heddles but it doesn't go high enough.

This is my dream chair but the price is way too much ($800+).

Weavin Steven

 Wouldn't the arms be in the way? And would a drafting chair be wide enough?

feltedbag (not verified)

You can get them without arms.  With the one above you can lower the arms.  For me, the seat would be perfect but going to an office furniture store and testing them would be the best.  I stay in one spot on my bench.

debmcclintock

 I weave standing up and sometimes sitting down at my Harrisville rug loom.  It came with an attached bench but I could never get it adjusted properly for me and had someone make legs for it so I could move it around.  Sometimes I use a low cost swivel bar stool at my loom, it allows me to lean back on it and then easily stand up from it and the swivel works with me when I throw the beater back and forth.  It is amazing how getting just the right height works once you figure out what it is.  I think the hardest part if figuring out what works for you.

Michael White

Hi, to answer your first question. Yes, you can damage your weaving with your knees. Your knees are only rubbing on part of the warp, move the weft yarn. Depending on the yarn you could be changing the "beat". Have you tried raising your loom with books to see if this is more 'better".

Michael

claudia (not verified)

Instructions for determining correct bench height while weaving can be found in a previous thread, here.  These are from Walter Turpening who makes and sells benches for weaving.

If you are considering weaving standing up you might want to try a Rio Grande loom which is designed for walking the treadles and weaving while standing up.  I tried one last year and loved it.  They are not easy to find used and come in two different models both sold by Weaving Southwest.  I don't know if they will have a loom with them but they will be at Convergence and are located north of Albuquerque in Taos, NM (great place to visit and I would love to live there.)

When we were in Taos we visited Weaving Southwest and met the new owner, Teresa Loveless, who is Rachel Brown's granddaughter.  Teresa, who learned from her grandmother, is a wonderful weaver and has done a fantastic job with the business which was started in 19 87 by Rachel Brown.  It has been owned by a variety of hand weavers along the way and has now come back to the Brown/Loveless family. 

The Standard Rio Grande loom is here and the Cadillac is here. 

Claudia

 

lkautio (not verified)

I use a bench for all my floor loom weaving.  If it is the proper height for you and the loom it makes everything more comfortable. An adjustable weaving bench is a real plus.  You can raise and lower it for different looms, different tasks, different weavers.  I have a Harrisville bench that I've had for 25 years and it still works great on everything from my little Harrisville to my big Mac (now sold) to my really big Weavebird.  It is virtually identical to the second one of your options.   I've used a lot of other benches (at round robins and four years of classes at Hill Institute) and I've never liked anything else as well.  I also like that it has a rocking option, which I find easier on my back and upper legs.  Rocking takes some getting used to but I've found it worth the effort.  A good seat pad (sheepskin, bath rug) is helpful, too.

Sara, thanks for the knee beam thought.

Laurie Autio

Weavin Steven

 Thanks everyone for your suggestions.

Michael – I had thought that something couldn't be right about rubbing against the cloth. You just confirmed this.

Claudia – thanks for the info about  upright looms. Drat, wish I could make Convergence. Not only did I grow up in Albuquackie, but it would be great to go see this show. Unfortunately I own a shop in Sisters, Oregon. The weekend of Convergence is also the busiest shopping day of the year in my little town. The annual Outdoor Quilt Show is held the same time as Convergence. But I will look into Weaving Southwest. Something just tells me that I'd really enjoy walking the treadles.

Ikautio – I think I'll go ahead and get that second bench. Relatively speaking, it's not that expensive compared to other benches offered by loom companies.

tommye scanlin

 One more thing to throw out for consideration regarding a bench... Walt Turpenin (sp??) does a fantastic loom bench, custom built to match your height and the loom you use.  I ordered one from Walt a few years ago at one of the Convergences... I like it quite a lot!

Tommye

Joanne Hall

I had several Fanny looms in the studio back in the 80s and when I had a tall weaver, I had blocks of wood that I put under the loom.   Then you need to lengthen the treadle cords, using Texsolv so that they are adjustable. 

The loom is really too short for you and no bench will solve that problem.  So, put the loom up on at least one 2x4, and it might be better to use two.  Then a bench will work.  Glimakra has a new bench at only $149, adjustable in height.  It is very important to have the seat adjustable for your comfort.

Joanne

Hi all,

I'm six feet tall and am having a bit of an issue with being comfortable weaving on my Fanny.

I'm not currently using a weaving bench but have tried several chairs that I have around the house that I'd hoped would work. I'm hoping that a weaving bench will solve the height and comfort issues.

 

Submitted by Weavin Steven on