I have some yarns I no longer want to use. So my idea was to use some and give some away. I put 5/2 cottons together with the idea that same size yarns shrink the same. Will that not what happened. I don't know if that is really not true or if it had to do with my weaving. Any ideas? I think you can tell from the picture that the white shrink less than the rest.

Comments

lkautio (not verified)

Interesting.  My experience has been that white or natural shrink more than colors, presumably because they have not been through the shrinkage incurred in the dye process.  Perhaps the white was twisted differently, from a different manufacturer, not pure cotton (even if labeled cotton), shrunk more in a bleaching process, different degree of mercerization, or something similar.  This is where that evil word, sampling, comes in <g>

Laurie Autio

 

laurafry

When combining lots of different yarns, possibly from different manufacturers, it is a good idea to not weave solid stripes but to distribute the different yarns through out.  This is most easily done in the warp otherwise you need lots of shuttles....when I do this I usually do it on my big loom with a sectional beam.  Look at my projects - the Spring Towels are an example of using lots (9 different colours on 18 spools) and randomly wound and threaded.

Cheers,

Laura

kerstinfroberg

I second Laura here! I often warp with many different spools, in both different weights, colurs and materials. When threaded randomly, it (nearly) always work.
But... once I used a mercerised weft for some stripes, un-mercerised for the rest of the shawl. With disastrous efects - read more (and see picture) on my blog.

Kerstin

sally orgren

Sometimes I suspect when you switch shuttles, that can have an effect on how the weft is placed in the shed.

I just finished a series of linen towels, all the linen was the same and from the same source, but I had 4 different colors going.

I was using an EFS (end feed shuttle) for the major (natural-colored) areas, and boat shuttles for the smaller colored stripes.

One color in particular (after washing) seems consistently a bit wider than the rest. The only thing I can think of is that I wasn't consistent in my shuttle-throw for that color.

Joanne Hall

Hi Sally,

I am inclined to blame it on the thread.  I understand the the tension on the weft can change.  Of course it is adjustable on an end feed shuttle and also by how fast you throw the shuttle, but that should not make a big difference.  Plastic bobbins create more drag on the thread than quills do, so that could make a little difference if you used a quill for that color and bobbins for the others.

The other thing that could have happened is that you advanced the warp right before weaving that one color. But if you used the color more than once, that would not be the cause.  I think it would be the thread itself that did not shrink as much as the others.

Joanne

Michael White

I have a industrial cone winder. I can adjust the tension on the yarn being wound on to the cones. Sometimes I get it a little to tight and Cheryl complains about how the yarn comes off the tight cones. Now just visualize a hundred or more twisters, winders all going a once. The tension on everyone is just a little different. This is how you can get a over twist on one cone and not on other. Even when they are all packed in the same box. Now lets look at the cotton being spun. If the QC is very very good you will get uniform yarn. Now depending on how the cotton is blended and the QC you may end up with a hard yarn or a softer yarn all in the same run and dye lot. Everything depents on the QC person.

Michael
Former QC and safety manager Quail International

 

 

 

Lauries (not verified)

Thanks for all the input. I did four pieces on this warp on each piece the white did the same thing. OH well. I did got all the colors but white from UKI. The white was purchased at my guild as part of a donation from a member, so I have no idea who is  the manufacturer or supplier  Thanks again. Laurie

Submitted by Anonymous (not verified) on