Whenever I have a draft that has just a few threads, 3 to 6 threads on the ends of the 2 back shafts, I can never get those threads to form a shedd properly.  They always hang down a little lower than the other threads.  I can still weave, but I sure would like some tips.

Thanks,

Karen

Comments

claudia (not verified)

Hi Karen,

You may need to add some weight to the back shafts with only a few threads.  How many shafts are you using and what structure are you weaving with only 3-6 threads on a shaft?  Are using a jack loom or a countermarche?  I'm still learning about countermarche and adding weight would probably not apply if that is the case. 

Claudia

Sara von Tresckow

 Since I've started working with a 16 shaft dobby, I've also begun putting the largest number of threads on the back shafts and those with just a few toward the front.

My dobby is the Toika gravity countermarche and the distance from the fell line to the back shafts helps them move better. And yes, I've added a bit of weight occasionally to shafts that were not sinking enough - in the form of drawloom lingos put through the lower loops of the Texsolv heddles.

Submitted by Anonymous (not verified) on