I've been weaving rugs with my 63 inch Glimakra stanard loom, not feeling the need to add the remaining four shafts.  I'd like to put them to use now if I can.

I have Joanne's book, Tying Up the Countermarch Loom.  I've just finished a project and have not removed it from the loom.  When Becky A helped me put my first four shafts on we needed a threaded, sleyed, tensioned warp.  Can I hang the other four shafts with this warp, or do I need to do it with my next project?  I'm a little confused.  Thanks.

 

Diane

Comments

claudia (not verified)

Diane,

I am sorry your question never got addressed.  I have just tied up my first countermarche so don't think I am qualified to answer.  I believe you need to do this on the next warp because you would need to have all 8 shafts threaded before you could complete the tie up of the lamms.

Hopefully, others will see this and answer.

Claudia

Sara von Tresckow

 Since you have the first four shafts adjusted, you should be able to put the locking pins in place and hang the other shafts and cords, do the coarse adjustments, and then finalize everything when you get the next project on the loom.

By fine adjustments, I'm thinking about the tieup to get the difference in the cords from back to front to get an even shed, etc. Adding shafts is a lot easier than setting up the loom in the first place.

 

Submitted by Anonymous (not verified) on