Above seen is an example of  shirting fabric .

Spesifications

warp  : 40 / 20 Nylon Lycra    40 threads / cm

weft    : 36 / 1  cotton  ( black and purple )  26 threads / cm

the article woven on a jacquard power loom

double layer  plain weave is used for the front side  colored rectangles  and for the ground weave again a double layer  mock leno weave is used.

 

 

 

 

 

 

 

Comments

claudia (not verified)

Thanks for Joining the Weavolution. Welcome to the site that offers a free and open exchange for hand weavers around the world.  We look forward to hearing more about your weaving experiences and challenges.  The photo you have posted here is very nice.  Have you tried adding all this information in your personal project section?  There is a Help topic on how to do it here.

Please tell us more about your fabric.

Claudia, Weavolution co-founder

lkautio (not verified)

What an interesting fabric!  I bet it makes wonderful clothing.  How do you deal with warping with the spandex?  Is it coming straight off cones through a tension device or put onto a back beam?  Thanks for sharing.

Laurie Autio

Alison (not verified)

I second Laurie's questions.  I'd like to know how you kept the warp tension even and how much breakage you had.  Did you use a temple during the weaving?  

Alison 

tillkey (not verified)

This article was woven on power  jacquard loom , so the weaving machine has temples on both sides and the shrinkage amount of this article about %  60 .

weft density  is 26 threads per cm. after finishing process  the density goes up to 45 --47 threads per cm .

 

tillkey (not verified)

warp beam is prepared on a sectional warp machine which has 600 cone creel .

 

maybe using a simple tensioning device for each cone  , can work for handweaving  in order to stabilize the spandex yarns

as you know spandex covered  yarns can elongate up to 300% maybe more to it's original length ,depending on the spandex amount .

 

ingamarie

I'd be curious to see the difference between on the loom/before washing and this presumably off loom picture.

Submitted by Anonymous (not verified) on