I have my husband's grandmother's rag room loom that I am trying to set up to use. I have gotten a copy of the original instruction book and it refers to a metal slide used in warping. Does anyone have this part and if so, can you tell me how essential it might be - Is there something that I could use to replace it or duplicate it?

Comments

Michael White

Hi, you need to repost this under "Weaving," more people will see it. This section is for Weavolution site help.

Michael

Mary C (not verified)

This might be what you are asking about and it is used to pull the warp through the heddles and the reed.  Some are longer and make it easier to go through both at the same time when warping.

Do you have a picture of your loom? 

Mary C

Michael White

Hi, What Mary posted is called a threading hook, they come in different lengths. The longer hooks are used for threading 8 harnesses or more. The price at yarnbarn of Kansas is $7.50.  Do you need one, no, but it is a lot faster then a paper clip.

Michael

ridinteacher

Could this be what you are talking about?  In my instruction manual it is called a warping guide, but it slides along the back beam to guide the warp into the desired section. 

I use it every warping.  I suppose if you had some kind of tensioning device you wouldn't need on of these?

Here's a side view... it was broken when we got it, so it's been altered a bit.  There is a screw that should tighten down on the beam to hold it in place, but my screw is stripped.  Still works, but I hold it where it needs to be when I'm cranking on warp.

sally orgren

Wow! Thanks for posting a photo of this device! I have always read about these, but never seen one. It makes total sense when working with old looms that have sectional beams. I wish we had one for the Weaver's Friend at a historic site where I volunteer.

ridinteacher

wow....  8^)  I didn't know I had a rare piece!!!   lol

Mary C (not verified)

Wow, your loom looks brand new compared to mine:)  Here are a couple of pics of my guide.  It gets held most of the time when I'm cranking on the warp.

 

suzyhok (not verified)

 I had Union rug looms for years and this simple rustic tensioning device worked beautifully when winding a sectional warp.  The Union even has a built in spool rack -- it looks lethal (metal rods sticking up at the base of the loom) but again -- it works!

Enjoy your Union -- its the best loom ever for making a firmly beaten rag rug!  

:D Suzy

aclosecall (not verified)

Thank you for your replies.  The metal guide with the holes is exactly what I am looking for....maybe I can take your pictures and have a metal worker duplicate it.  I did get my loom warped.  I soldered small loops of wire together and gorilla glued them to a piece of metal that will fit over the wooden bar....not at all pretty, but it did work.  I am on my third small rug.  The color process has me fascinated.

My biggest problem is trying to keep the selvage edges straight.  Maybe this is just an experience issue?  Any valuable lessons that anyone can share?

This is my loom, the very basic of home looms...sold for about $9.00 new.

Mary C (not verified)

Wow, not what I expected for the loom but then I'm just a beginner.  Maybe an earlier edition of Union Looms than mine.

Keeping the selvage edge straight is one of the biggest challenges.  When passing the shuttle through, do not draw the warp tight in a straight line, as this will cause the rug  to draw narrower.  Hold each shot of filling with the thumb and forefinger at the selvage edge as you draw the shuttle through the shed, leaving the shot of filling so it curves away from you four or five inches in the center.  Leaving this curve is important as it will insure keeping your work out full width.

Keep on going and it will only get easier:)  Sound like you're having fun.  I've really enjoyed working with different materials for the warp.  I'll try anything I can find to recycle into a new weaving; even some of the experiments are the best!

Mary C

Cindy Sawyer (not verified)

This is the exactly what I needed also!  I have everything but the warping guide.  Any measurements that you could provide would be very helpful.  I am planning on getting one fabricated unless you know of any place that already makes this part.

Dayburner (not verified)

This is a very informative thread.

For those of you who weave on the Union, do you loop or tie the warp threads while winding on (using a tension box or the "warping guide") directly onto the sectional pegs? Does someone have a photo of this process or how they do it?

The pegs on my Union are extremely fragile.

A seasoned weaver suggested I drill holes inbetween the sectional pegs and thread a cord though it attached to a rubberband to tie on the warp. That is how the Cranbrook loom works. I have also seen masking tape used with cord.

Any ideas? Many thanks.

lalalorie

Oh finally I have found someone with a loom like mine. I bought an old Union loom months ago and cannot figure out how to warp it. People keep telling me I need a tension box and spool holder, but I couldn't seem to find someone who could tell me which ones would fit. From what I am seeing here I don't need anything. Your loom looks just like mine with no parts missing. Any suggestions on learning material or dvd's anyone can offer me would be appriciated.

victoryfarm

Janet Meany, at http://www.weaversfriend.com/ and author of the Rag Rug Handbook, has manuals for this loom. Be sure to tell her WHICH Union Home Loom you have. I think there's one by this name that is a standard floor loom. Better still, send her a photo. The Manual Library she maintains is such a help for those of us who love antique looms!

I love this little loom. Would never try to weave anything particularly heavy on it, but the engineering is just amazing.

Good luck!

Foley Family

Hi.  New to this forum, and I just inherited a beautiful union home edition loom.  The reed is horizontal.  I have removed the old warp, and Wrapped warp in three of the new warp sections.  The middle(peach color) I have 10 lengths of crochet cotton.  Right beside this on each side(warping from middle out, I have used 15 strands of white crochet cotton.)  I tied a foundation loop at the end of my strand collections, and my son turnd the crank counterclockwise away from me as I held the strand collection straightening it out as he wound.  I am awaiting reply from the lady who has the instruction booklets.  While I am waiting, I thought I would ask:

1.  There are ten eyehooks on the th the two crossbars at e back of the loom, do I thread the warp through these and then up through the reed? 

2.  Does anyone happen to have an extra spring that will fit this loom?

3.  There are 10 eyehooks on the back underside lip of the Reed.  Do I use these to thread the warp through before I thread the reed?

If anyone has any experience with this loom, please reply

sandra.eberhar…

How does this loom work?  How do you tension the warp and beat?  It looks more like a warping tool to me than an actual loom, but I am not familiar with it.

Sara von Tresckow

I've occasionally seen photos of these "devices" - one can hardly call them a real loom. I just found this link when looking for any photo material on the loom - and how it looks warped -

check this page out

http://possumjimandelizabeth.com/xhtml/looms_floor.html

This is owned by a seasoned weaver, and the results on this "loom" are, even admitted by the site owner, as less than stellar. These are the usual patented gismos meant to "help the housewife" and were more bother than help.

sally orgren

I had to laugh when I actually saw this loom via your link and read the owner's comments.

I have to admit if I inherited one, I'd certainly have to set it up and try it. (But no, I don't think I would be doing a lot of weaving on it.)

I DO appreciate Weavolution being a place where I can learn about all these different and unusual looms. And that weavers who follow us have a place to learn about these unusual looms, too.

Thanks to everyone for posting on this topic.

sandra.eberhar…

It puts me in mind of caveats about buying old sock knitting machines.  Some manufacturers of sock knitting machines had very poor (none) quality control, and an old machine that has been in someone's attic for 80 years may have been put in the attic because it didn't work.

nanawwjd

I want to start using my loom. I looks like it still has all its parts compared to your. Any thing you can tell me on how to use it or books that are out there would be great. Exicited to hear from you.

victoryfarm

(Just a repeat of my above post, for the benefit of nanawwjd)

Janet Meany, at http://www.weaversfriend.com/  and author of the Rag Rug Handbook, has manuals for this loom. Be sure to tell her WHICH Union Home Loom you have. I think there's one by this name that is a standard floor loom. Better still, send her a photo. The Manual Library she maintains is such a help for those of us who love antique looms!

I love this little loom. Would never try to weave anything particularly heavy on it, but the engineering is just amazing.

Good luck!

TAnn

I have a Leesburg loom that has a built in spool rack and a threading comb. I have the instruction book but am still having difficulty figuring out how to use the comb. I have contacted Leesburg and looked at Janet Meany's site but thought I would ask here as well. 

Do you know of a video, photographs, detailed instructions for warping a loom in this way? 

Thank you.

 

callyico

I am new to weaving and new to this loom. I have a Union Home Loom  Looks like the pic posted above that shows the whole loom. Just wanted to say thank you for the links and info! 

callyico

the pic was posted by aclosecall (thank you) and mine is  little different - mine has the sectional warping board at the bottom - long wooden pegs- that look a little fierce LOL. I was given this loom by a lady that came to an event I was doing a spinning demo - and she was moving and wanted it to have a good home :) Bless her for being so kind!

parkview112

Can anyone who has one of these guides please provide the hole spacing and size, I may need to make one?

The center to center distance between the holes left and right and top to bottom and the diameter of the holes. Also, the width of the guide and the length of each section from bend to bend.

Thank you very much.

Rich

Lady 6

woul you measure the spring on this loom and send me the measurements please. I have one of these Union Home looms and it is without springs. Do you know where I can get a manual for it? thanks

Lady 6

would you measure the spring on this loom and send me the measurements please. I have one of these Union Home looms and it is without springs. Do you know where I can get a manual for it? Thanks

Submitted by Anonymous (not verified) on