Hello everyone.

I've been weaving since January 2010. I'm trying to make some dense fabrics, normally 8/2 cotton with a tabby sett of 17 epi. After I wash the finished weaving it usually shrinks and inch or so.

I'd like to try dyeing some warp bundles from 8/2 bleached cotton but I have a question. Should I stick with the same sett I normally would use with the undyed yarn straight off the cone? My logic tells me that the yarn will full itself already during the dyeing process.

I appreciate your advice. :)

Comments

Alison (not verified)

 Hi,

Welcome to weaving!

While logic would tell you the yarn has been modified by the dye process, it isn't necessarily changed in the way you are thinking.  Weaving puts the yarn through a lot.  You are stretching and abrading it in the warp and if you're packing your bobbin or prin densely, and using a temple, you are also stretching the weft.

Wet processing a woven fabric allows the warp and weft to settle into each other.  Any other shrinkage (or fulling if you're working with wool and processing for a fulled fabric) will also occur.  With your cotton, if it was going to shrink, that would happen in the dying, partially offset by the tension on the warp and weft.  The dye can also cause the yarn to be thicker, but not generally by a measurable amount.  

So, depending on the cotton, it is possible that the sett will change due to the dye process, but without sampling, you won't know exactly how much.

I'm sure others will state it better than I, but this ought to be enough to help you start thinking through your issue.

Alison 

laurafry

What weave structure are you using?  17 epi is not particularly a dense set for 8/2 cotton.  For plain weave a set of 18-20 is generally recommended for weaving a balanced fabric when using it for both warp and weft.  24 is generally recommended for twill.  Neither of these is for a dense fabric, just an 'ordinary' quality.

While dyeing will allow the yarn to bloom, cotton does not 'full' in the way wool or other hair fibres do so you would use the same set as undyed yarn.  As Alison mentioned the yarn will stretch somewhat while under tension, and then during wet finishing the yarns will relax and meld into a whole cloth instead of individual theads.

If you belong to a guild, check to see if they have the book Magic in the Water; wet finishing handwovens for more information - including actual fabric samples before and after wet finishing - to see how the threads will change.

Cheers,

Laura

sequel (not verified)

All I can add is, if you dye some bundles and plan to leave others undyed, you may want to treat your undyed bundles to the same kind of wetting and drying as the dyed bundles, just without the dyes and chemical assistants.

Dexter_WKS84 (not verified)

Thanks Alison for your reply. I'm still learning the terminology of weaving...you did point out several things that didn't come to mind. I should make it a habit to sample and I guess that's how one gains their own personal expertise. Maybe I'm too excited to start a final piece. :)

Dexter_WKS84 (not verified)

Thanks Laura for the advice. I definitely will try 20-epi this time. I want as dense a fabric as possible for some projects I had in mind.

I only have a 10-dent reed and I was thinking of trying 20-epi (since it also seemed more convenient for sleying), but my mind told me that it was probably overdoing it and I used 17-epi instead. I was packing the weft in firmly with an open shed, and seemed like 20-epi would've worked out ok...still learning here!

laurafry

It depends on whether or not you want a 'balanced' weave - i.e. the same number of picks per inch as there are ends per inch.  If you are happy with a slightly weft faced weave, then go ahead with the 17 epi.

Cheers,

Laura

Submitted by Anonymous (not verified) on