Okay I am just getting back into weaving. I wove a couple shawls for my wife on my loom a couple years ago but forgot everything. I just finished spinning some alpaca and wanted to try an 8-inch wide scarf. Well I was a little worried that the 2 ply would not be sturdy enough for a warp but an expert tested some and said it was fine. As it turns out about 95 percent of it was good enough but for a warp I don’t think anything much less than 100 percent advisable. Anyway I can’t get enough tension and after fixing several strands I am throwing in the towel. Has anyone else had similar problems? What would you suggest I use for the warp to make a scarf from my hand-spun alpaca?

Comments

Karren K. Brito

I love to weave with hand spun singles, both warp and weft.  It takes persistance some times.  

Sometimes the hand spun is hairy or fuzzy and each time you change the shed the fuzzy catches the fuzz next to it and it soon it disintigrates.  Sizing can be used to tempoarairly glue the fuzz down for weaving and then be washed out to restore the soft hand.  Sizing is easiest before warping but sometimes you don't know you need it until you have it on the loom.  Gelatine is a good sizing for wool type yarns but most useful applied before warping. On the loom spray starch or sizing may do the trick.   Spray  the warp that is stretched from the front to the back beam.  Sometimes you have to comb or use your fingers to lay the fuzz down.   Then let it dry before weaving.  When you advance the warp you need to spray again.  Hair spray works sometimes too.  Anything that can glue down the hairs sticking out while it is on the loom and then wash out when you finish the piece  can work as a sizing.

 

If that doesn't work, or it is not the hairiness that is the problem,  I have made a second warp, same # of ends and length, of a very fine thread.  I add this in to the hand spun warp to strenghten it.  The second fine wrap gets threaded thru the heddles.  Unwind the handspun warp, tie the second warp to the back beam among the hand spun and then rewind the two warps together.  The fine warp adds strength in the weak spots, even sewing thread can work and it comes in many colors.

Good luck. Hand-spun makes special fabrics an is well worth the extra effort, I think.

AJM (not verified)

It wasn't the fuzzyness that was the problem. The fine thread idea sounds like what I am going to do next time. I am thinking I will try a cotton warp with #10 crochet cotton and use the alpaca for the weft this time.

sally orgren

Alpaca is a special fiber to weave with, handspun or not, because you need to sett it dense, and it is still slippery. It doesn't "full" like wool when washed. Even sett dense, it retains a nice drape when finished. Yes, stickiness is not the problem!  ; - )

Did you spin it with some wool or something to give it a little more grip, or is it 100% alpaca? If so, I would say the short answer to complete your project is to use your Alpaca as the weft, but pick something just as nice for the warp— a soft wool, cashmere, or angora, something that matches the quality and feel of your alpaca. WEBs has a nice "lace weight" Alpaca-silk in colors that are great, and that would work well for a compliment warp to your weft. Check under the "sale" part of their site, I think they have half pound cones.

Post photos!

FiberMusings (not verified)

 Timing is everything. I just finished re-reading some past issues of Handwoven. There was something in one of the issues about weaving with alpaca (handspun wasn't discussed, but alpaca yarn in general). The problem is that alpaca is different from sheep's wool because it is so much more slippery and has a tendency to slip apart. The writer goes on the say that it is possible to use it for warp, but you just need to have lighter than usual tension on the warp. Enough to get a clean shed, but not so much to pull the fiber apart.

Does that make sense?

I'm not sure that I would use crochet cotton as warp. The hand of the finished fabric will be much stiffer and won't drape as well. I like Sally's idea of a silk blend, or even a fine wool.

loomroomcat (not verified)

You really don't want to use a cotton warp and alpaca weft.  the woven fabric will slide on the cotton and you will get bald spots. I know this because I tried it with wool when I first started weaving.  I keep that sample to show others what not to do.  You can buy commercially spun alpaca pretty cheap and that is what I use for warp.  I have woven several alpaca scarves and blankets and not had a problem.  If the handspun is larger than the warp you really don't see it much anyway.  I don't weave under alot of tension with wool and alpaca either.  Not as important as with cottons and rayons. 

 

Good luck!

AJM (not verified)

Thanks all for the input. I wound a warp in the cotton but now that I have your input I won't use it. I will pick up something better. On Saturday I can make it to my local weaving shop "The Spinnery" in Frenchtown, NJ.

loomroomcat (not verified)

Cascade 220 makes a wonderful soft warp also and it is inexpensive. I use it for scarves alot.  One skein will give you a pretty good scarf for about $7.  Available at most yarn shops.  Good luck! 

AJM (not verified)

Well I picked up some wool yarn at Betty's, The Spinnery and I am working on it now. We decide to use some of the alpaca in the warp but mostly the wool for strength. My wife and I decided on the red instead of trying to match the color of the alpaca. Thanks for everyone's suggestions.

 

TinaHilton (not verified)

Won't there be a problem with differential shrinkage with stripes of wool and alpaca in the warp?  Wool usually (but not always) shrinks more than alpaca so you might end up with ripples.  Right?

AJM (not verified)

Well it is all new to me so I will have to let you know. It is an experiment so it will be interesting to find out.

sally orgren

Well, it looks GREAT on the loom! SO glad you are posting, and posting a photo, too. You are definitely setting out the trail blazes for others to follow in your footsteps.

I think Tina is right, you might end up with some differential shrinkage action. The alpaca bits won't move much, but the wool areas will shrink more, possibly creating a shirred effect in those areas. 

When finished, if you wash it gently, that might reduce the effect somewhat. (Washing gently means a large sink or pan of water with some shampoo in there. Swish around the finished scarf a bit, don't wring it out or get too vigorous in your swishing to "felt" it together. Remove, rinse, roll up in a towel and press to remove excess moisture. Then lay flat to dry completely.)

If you wove shawls in the past, you probably remember when weaving with materials that you want to feel soft and drapey, think about "placing" the weft, not "beating" the weft in with a wallop. Wool can bulk up into a stiff fabric before you know it, if you are beating hard. Keep in mind the wool will "full" when it gets wet (increase in size a bit). Ask me how I know...

Knowing the difference in beat can keep your scarves from becoming long and skinny (but well-wearing!) rugs.

BTW, this is a photo of alpaca (dark yarn) and cashmere (light) in an 8 shaft pattern, a scarf woven for my husband. (Gotta keep those spouses happy when looms take up so much of the living space!)

 

kerstinfroberg

It is interesting that at least two persons have had woo full/shrink/felt more than alpaca - my (admittedly few!) experiences have been the opposite. In fact, I have never been able to make wool (any wool, in any yarn form) full/felt/shrink half as much as alpaca...

AJM (not verified)

That is funny that you say that. I knitted a fulled bag for an knitting book author. She supplied the alpaca yarn and I knitted a beautiful bag that was suppose to be fulled. The bag was a nice cable pattern. Okay let me backup I don't know why anyone would use alpaca on a felted project but okay I was just doing the work. I have made over 30 pairs of felted clogs out of wool so I figured I was an expert in fulling. Okay back to the alpaca bag. I put it in the waser to full for 15 minutes which is one quarter the time it takes to full clogs and usually in wool I don't see any fulling happening after only 15 minutes. Well after 15 minutes the bag was completely fulled and all signs of cables were long gone. What a horrifying shock after all that work.

 Well I finished weaving the scarf and now I have to cut the fringe and wash it (gently) and I will let you know how it comes out.

claudia (not verified)

You story about fulling alpaca matches my experience.  I did an alpaca scarf once and fulled it for 2 minutes in the washer and it was half the previous size.  I had expected about one third but NOT 50%.  I used it to make a pieced bag from other failed felting projects.  That was the last time I avoided sampling, especially when the item is being fulled.

Looking forward to pictures of the completed scarf.  Remember to measure it off the loom before wet finishing.  I always forget that one vital statistic.  It comes in handy when making future items with that yarn.

Claudia

sally orgren

 Okay, we're all waiting with baited breath to hear the results and see the photos!

TinaHilton (not verified)

Great photos.  I LOVE braided twills.  These are gorgeous.

AJM (not verified)

Pictures and measurements are coming. I have been so busy with knitting and crocheting. I should have time on Sunday so look for pictures on Monday.

 

AJM (not verified)

Okay as promised the finished picture. I am happy with it although being a perfectionist I see lots of things to improve on but for an experiment all in all I am happy with it.

By the way I am thinking this is actually llama and not alpaca because it is not quite as soft as alpaca. I have to keep better records of what I am spinning.

 

ingamarie

Looks great and no problems with differential shrinkage that I can see!

 

ingamarie

Looks great and no problems with differential shrinkage that I can see!

 

Submitted by Anonymous (not verified) on