Has anyone figured out how to warp with one of those rigid heddle type paddles without getting the threads all twisted? I know there's books out there, and I've read an article or two, but can't seem to get the hang of it. I have 10 threads in a mixed woolen warp. Very forgiving. I don't twist at the cross end (I warp on a mill), but at the other end I have to give it a turn, that doesn't unturn at the other end. Clues,  hints???

thanks.. marie

Comments

TinaHilton (not verified)

I'm not very good at using it yet, but I do know that I have to start it on a certain side or I have problems like you're describing.  It's been a while since I tried it, so I don't remember if it's the left or the right.  You might try changing it to see if that helps.

The first time I tried using a paddle, I had 12 ends.  My husband came upstairs to ask me a question, saw me with all this yarn between me and the spool rack, the paddle, and I was saying a few choice words.  He's a very smart man and quietly left the room without saying anything.

villageweaver (not verified)

This post has been deleted by villageweaver

villageweaver (not verified)

After many frustrating and not so successful warps, i finally settled into nirvana with the following book:

Leslie Voiers, Workshop Notes for Winding Multi-Colored Warps with a Warping Paddle 

http://www.camillavalleyfarm.com/books/bookwprc.htm

the big thing is that you go clockwise at the peg of your raddle cross, and counter clockwise at the peg with the threading cross.

 

 

ingamarie

I'll try that!  I only make one cross, at the top of the mill, but I can't see where it would make a difference if there was a cross there or not. Thanks!

marie

villageweaver (not verified)

it's all about the twisting the paddle on the ends that keep the threads from twisting during the process. took me awhile to get it, but when i did, it was a life changer!

 

ingamarie

Yea I started to see that, then the warp was done. A spool rack would probably help too. Or more bowls for the little balls to roll around in, they got sort  of rowdy :) It didn't really matter on this  warp, but that's why I wanted to practice on it.

 

Kristina (not verified)

  By looking for a translation for " paddle" I found this:

http://kindredthreads.blogspot.com/2010/04/warping-paddle.html

http://talkingaboutweaving.blogspot.com/2008/03/warping-paddle.html

May be helpful, even if  warping is already over.

Kristina

jeannine (not verified)

.   hello, this object is laying around in my workshop for a while;i even forgot where it came from. Could this be or have been part of a warping-paddle?Or is it just a small rigid heddle?

Caroline (not verified)

This looks like a small rigid heddle, but it could be used for a warping paddle. It would be quite simple to make a frame and handle to make it easier to use. On the other hand its a good size for a band loom!

ingamarie

It's the proportions of of  paddle, where the wood parts have come/been taken off. Or it could be a rigid heddle with the same issue!  Hardly matters, it would work for either one.... :)  marie

Submitted by ingamarie on