Hi all -

This past week I tied on a 3 yard warp to do a bit of gamp work, and it turns out the mill end I was pulling from had a remarkable number of weak spots.  I've gotten through about 2 feet of the warp and have had to repair somewhere between 3-4 broken warp threads, with several others looking deeply suspicious.  They're breaking in various places, or fuzzing up mightily, which leads me and my teacher to think it's the yarn more than it is me or my loom.

So, here's the question - would you continue to fight with the warp and repair thread after thread, or toss it and go on to the next interesting project?

-heather f.

Comments

laurafry

If you really want to weave this yarn you'll likely need to paint on some sort of warp dressing.  Depending on the fibre you might be able to use cheap hairspray, or Leclerc sells a warp dressing called Clerco.  Not always easy to find that, tho.  You might also be able to paint on a rice paste, or gelatin, although either can be a bit gooey.  so it depends if you want to risk getting it on your loom.

Whatever you use let it dry completely before weaving, then paint the next section of warp, dry, weave, paint until done.

Cheers,

Laura

lkautio (not verified)

Depending on the fiber flax seed boiled in a bit of water, spray starch, a flour and water mix, or even just rubbing the warp ends with a bar of soap can all be helpful.   Google warp sizing for recipes. 

I spray or paint it on below the warp beam, behind the heddles, and in front of the heddles every 2-3 times I roll forward on a small loom.  Make sure the warp is dry before you wind the cloth onto the front beam or it may mildew. 

If you know it is going to be a problem warp you can dip it into the sizing solution and let dry (snapping a few times as it dries so it doesn't stick) ahead of time.

Laurie Autio

tien (not verified)

How much do you like the warp?  I'd personally cut it off, unless it was something really expensive or something I was really in love with.  The question for me is "Will I enjoy weaving this, or is it so important to complete that I'm willing to keep at it even if I don't enjoy it?"  Very few warps fall in the latter category for me.  I fought broken threads once through an entire 10-yard warp and will never do that again...

Tien

hlf (not verified)

The warp was part of a class that was letting me explore gamps.  I've gotten about 5 or 6 variations on each of the three patterns involved (Bolton Cord, Little Cord, and Johan S. #123) so I think I'm agreeing with you about ripping the warp off.  I've got this awesome crammed and spaced project just waiting for me...  :-)

Thanks, everyone, for the advice!

-heather f.

Submitted by Anonymous (not verified) on