So far, most of my weaving has paired similar yarns (thickness, twist) in warp and weft. However, I have a pair of recent handspun bobbins and am curious what might show them off to the best effect.

One is a moderately high twist 2-ply, so it's fairly dense; the other is a very softly spun, slightly overplied 2-ply, so it's very airy and lofty. The airy yarn has less WPI than the high twist, though both contain about the same amount of fiber. They are both Suri alpaca, spun at Madrona Fiber Arts this past weekend.

My thought was to use the high twist as warp and the soft spun as weft, but I am also wondering if any particular draft would help pair them the best: a twill, a waffle weave, or something else I haven't learned yet :)

Here's the beauty shot ...

Comments

Sara von Tresckow

 What ifs are part of the fun of weaving.

Do have the courage to just experiment based on what you think the yarns will do for you.

Take note of the properties of each yarn - for instance, that alpaca when less than tightly spun tends to fray out in the warp, etc.

When unsuure of the strength of warp thread, size it as an insurance policy.

Seasoned weavers actually rather seldom use just one type or weight of yarn in a major project.

BonnieI (not verified)

I like to use a soft handspun as the pattern weft in overshot. The pattern weft is supplementary, so it sits on top of the ground (plain weave) cloth.  That background is composed of the warp plus the tabby weft. Choose a warp that is finer than the pattern weft and contrasting value- it can be lighter or darker but not the same value if you want the pattern to show clearly.  This is not a good use of an overtwisted yarn but would be very appropriate for the airy and lofty handspun you describe. 

Bonnie Inouye

Submitted by Anonymous (not verified) on