Hello everybody,

I just joined Weavolution and am learning how to navigate on the site.  There seem to be lots to explore, but for now I have a question - already you might say...  well, yes - that's why I joined in the first place  :)

I am helping a friend from France who is trying to assemble a loom she's had for some time.  She's not a weaver but is interested in learning, but of course she has to put that loom together in the first place and she doesn't have any instruction sheets.  She send me a picture of the pieces but although I am an experienced weaver, I cannot identify this "machine" and I think some pieces might be missing.

Everything has to be assembled, the frame, the harness, the heddles...  everything.  Does anyone know this type of loom and where I can get a user's guide to help her out?  Here is the picture of the pieces.

To give you an idea of the size, the reed measures about 36", and the whole thing fits in the box (and there is no name anywhere)!!!

Thanks for your help...  have a great day

Jacotte

Comments

Caroline (not verified)

hi Jacotte,

How many shafts can you make out? Can you identify the pieces that make up the castle and the harnesses? Whats left over has to include the reed holder, warp and cloth beams, and the loom frame itself, and whatever lever system is used to raise and lower the harnesses. It looks like its a table loom, if that is all the pieces. It looks nice and clean and well taken care of.

The Schacht website has a nice clear diagram of the parts of a table loom halfway down the page here that should help:

www.schachtspindle.com/instructions/weaving/tableloom.htm

Quite often the actual loom frames seem to be very thin bits of wood, not big solid beams.

Just from the photo there appears to be room enough for six shafts; one would expect the harness frames to be wooden, have  bottom, top and side pieces and hooks or loops across the top to which the lever or pulley system is fastened. The black metal lengths may be the top pieces of the harness frames. It does look as if some of the lengths of wood may be missing, but until you can separate the parts out and work out what each bit you do have does, you cannot be sure - hopefully its complete. Its not that difficult to replace anything thats missing, and a lot can be made yourself with a saw and some sand paper.

There are several members here who repair and refurbish looms professionally who will have lots of tips and hints for you. Take lots of photos as you go, so then if you are stuck its easy to show us what you need help with.

Good luck! I wish I was closer as I'd love to dive in and help, but alas, I'm in Australia!

 

Michael White

Jacotte, You have a good puzzle to work on. Could you get your friend in France to send close up pictures. Lots of hooks and eye bolts, and then all of the thin metal rods? I would ask your friend to look closely at each piece to see if there are any matching marks (piece "A" to "A" etc) and also to try putting pieces together to see if any of the parts feel like they go together. Close up pictures would be nice.

Michael

Sara von Tresckow

 The fact that the pieces have a matching box indicates that this is probably some type of table loom, knock down to save space when not in use.

Looking at the pieces, I see side slots for 2 and 4 shafts, but nothing that looks like shaft frames that would fit in them.

Whatever it is, it is NOT a type of loom commonly used or sold today.

This will probably not make your friend happy, but perhaps she should buy or rent a modern rigid heddle or table loom  - to learn to weave and use current terminology and methods. THEN she will have more ideas on how to implement this interesting collection of loom parts.

Jacotte33 (not verified)

Thank you for you help...  " I wish I was closer as I'd love to dive in and help, but alas, I'm in Australia! "  This is how I feel too...  I am in Vancouver Canada and she is in France!  I am trying to help her via internet, so I can only suggest things just the way you have.

She has sent me other pictures on my request (I hate to flood the message here but I might put some relevant ones), and from what I see, I think it is either a 4 or even a 6 shaft - from the slots on the wooden pieces (those measuring 12" high).  There are also those small wooden pieces with a hook at the top - I think these would be to build the frames with the thin metallic rods.  There are 12  of those (7" long) however there are 6 rods measuring 36" and 7 measuring 41".  My guess was that the frames are put together with the 12  7" long wooden pieces and the rods but there are only small ones and there should be 12 (the longer ones being used to hang the frames so that they go up and down in the slots).  Here is what she sent me:

      

Then there are 6 black tubes measuring only 36" or so...  with hooks, and those wooden bars with a metallic handle as it were...  notice those also have some kind of hooking device that suggests some lifting mechanism with strings.

One more puzzling thing, the warp beam...  I see some "nails" protruding which is fine for the back beam, but not the front???  The reed holder measures 36" in the weaving area but the bottom wood measures almost 42" suggesting that is rests on something larger.  What would that string attached to it be for???

    

The last pictures are also very intriguing...  I am pretty sure the items on the right are the heddles, but what is that dial on the left (there is only one)?

    

My friend also talks about a bunch of flat rubber bands about 2.5" like the one at the bottom of the dial.  She confirmed that the box is pretty full with all these things in it, that would mean there shouldn't be any big pieces missing - may be just rods or small items (including the instructions!)

If you have suggestions, they will be greatly appreciated.  Thanks again for taking the time to think about it.

Have a great day

Jacqueline

 

WallyWeaver (not verified)

I'm left wondering if this is only one of two (or more?) boxes of materials intended to be a loom . . .

Jacotte33 (not verified)

Oh NOOOOOoooo  I never thought of that!  I'll wait a while before telling her that!  :(

Michael White

I think you need to contact Possum Jim www.possumjimandelizabeth.com/ He has a collection of old looms maybe he has seen this one.

I am thinking the post with the black feet are the frame. The beams go through the eyes on the post. I can not tell from the picture but I am thinking maybe the black bars hold the frame together? The other short post may form the castle, can you email me the pictures so I can enlarge them for more detail.

Michael

[email protected]

 

Michael White

Hi, I do not think I saved my last message. The pieces that you think are heddles have the holes going in the wrong direction for a standard loom, could this be some type of tapestry frame? I have sent an IM to Tommye to ask her to take a look see.

Michael

tommye scanlin

 Hi Michael,

I've been reading these e-mails about the mystery loom and the two beams with nails caused me to wonder if this was a tapestry loom... I haven't seen one like this but many frames have nails at top and bottom to string up the warps.  However, I surely couldn't say about this loom--sorry to not be able to help out.

Tommye

Michael White

I enlarged the dial and I am posting it here. Anyone have a cue?? I think it is someway to keep up with your location?

 

Michael White

Jacqueline, I know it is 12:19 am in the UK. So you can ponder the enlarged pictures over your morning tea.

Michael

Michael White

Here is the enlarged picture of the heddles? and heddle holders?

MIchael

 

Submitted by Anonymous (not verified) on