Want to make denim placemats.  Got a rigid heddle loom.  10 dent heddgle with an 8 dent heddle coming next week.

What size warp do I need?  Got a cone of 2/8 cotton.  Do I need something heavier?  Can you use crochet cotton for warp?  I live so far from any large city but go to Kansas City a few times a year.  And thank goodness for online ordering.

I would appreciate any advice. 

Thanks in advance  -Jerry

 

Comments

crosstownshuttler (not verified)

Hi Jerry,

Welcome to weaving! 

8/2 cotton might be a little too fine used singly, but if you double it it could work. Crochet cotton will also work.

The Yarn Barn is in Lawrence, Kansas.  A good place to shop that's not terribly far from Kansas City.

Hope this helps.

Carie

macpac (not verified)

I saw that on the internet.  We don't usually go through Lawrence but maybe I'll get brave and go in there.

claudia (not verified)

Hi Jerry,

What books or magazines do you have to help with patterns? Have you searched the projects here on Weavolution? That's a great place to start.

Consider clicking on one of the ads on Weavolution.  Our advertisers keep the site free to all the users. You can call and talk to people at Halcyon orr The Woolery, Cotton Clouds,  Woodland Woolworks and they may have suggestions for yarns, books, etc.

What type of loom are you using?

Thanks for Joining the Weavolution! We're glad you found us.

Claudia, Weavolution co-founder

 

merrymac (not verified)

Hey, Macpac.  I saw that you were new and also saw the reference to Kansas City.

I am not far from there, either.  The Yarn Barn is about a 2-1/2 hour drive for me with KC being a little over an hour ... depending on what portion of the city I am going.

Carol Leigh's Studio is in Columbia, MO and she carries yarns, etc.  So, depending on where you reside, she may be another source for you.  Very nice lady.  She can also be found on the internet but I haven't ordered there.  Easier for me to drive there. 

Don't know if this info is helpful or not but there it is.  :)

Welcome to weaving.  The people on here are terrific.  You found a good site for info.  Life is good.

God bless.

Merrymac

macpac (not verified)

So I want to make some denim placemats and I have tons of jeans in a light to mid weight.  Planning on cutting the denim in 1 inch strips for the weave.  I live far far to the west.  The closest WalMart is 55 miles away.  So as this is a first project and I just want a warp that won't fall apart could I use a crochet thread.   Most seem to be a size 10. 

I have a rigid heddle Beka loom in 24 inch.  Everything is new to me.  I had some baby yarn and warped with that.  Seems rather strechy to me.  I have done the library book thing and search the internet.  It would just be so helpful if I could get a little advice.  As I said before I bought some 2/8 cotton warp thread which now sounds like it will be too light for what I want to do. 

As a first project I don't want to spend a fortune ordering something online that I can't look at.  I quilt, knit, cross stitch, sew, have done tatting in the past and now I really want to learn to weave.  Thanks for any help you can give me. 

raggyb (not verified)

crochet cotton will probably work fine for what you want to do - it is nice and firm for a warp.

You might want to experiment with the width of your strips. One inch of denim will be pretty heavy - try a test of 3/4inch and half inch and see what you like before cutting all the strips.

Barbara

 

ridinteacher

I agree with post #7 in regards to the width of your strips.  I use one inch denim strips for heavy duty rugs, so I would think a little narrower would be nicer for placemats...

Caroline (not verified)

Another thing to consider when using a rigid heddle loom: the heddles are plastic so will not take the amount of beating, as is required when using rag strips, so arm yourself with a beater. It needs to be  wider than your warp is and have a fine beveled edge on one side. I use hardwood molding from my local hardware store, and sand it down thoroughly before using it.. This works to hold the shed open if necessary as well, and if you lightly mark  the width of your warp, you can also use it to check you are not getting narrower and narrower through draw in. In a pinch I have used a wooden ruler, and even a pet comb, but a proper beater/sword/batten is a good piece of equipment to have, regardless of what its called.

Please take lots of photos, and then if you run into any difficulties, or have a question, you can show us what you are trying to find out. You probably won't have too many problems, so you can also use the photos to brag, and its useful to go back and look at them when you plan a similar project. Its also good to take notes and set up a project notebook.

Good luck, and have lots of fun! Creating something from almost nothing is a great feeling, and I bet your friends will all want some too!

macpac (not verified)

Thank you.  This helps me more than you will ever know.

macpac (not verified)

I may not have a yarn shop here but I do have a lumber yard and I'll get something to use as a beater.  I know they have oak trim and I have been known to use a saw and sandpaper.  lol  Just finished a basement remodel!  Love the idea of marking the beater to keep the width right.  You guys are great and that's why I joined.  To get info from the people who know.

macpac (not verified)

Do you just eyeball the width of denim as you cut or use a mat and rotary cutter?  I cut apart all the jeans this morning and am ready to cut strips.  Also, do I sew all the 3/4 - 1/2 inch strips together???  I can do that just need to know.  Got the sewing machine on the new counter in the sewing room ready for a test drive. 

ridinteacher

 I used to cut my strips for rugs using a rotary and mat... alot faster than cutting with a scissors.  I also sew the strips together  so that the seam lies on an angle to reduce the bulk at the seam.   It is harder to get a nice join with denim if I don't sew them.  They get bulky.  Better to spend the time sewing ahead of time instead of fighting with the material at the loom!   

FYI --I tear all my denim.   I eyeball my snips for tearing, but I've been doing it a long time.  Sometimes I do measure because I tend to eventually get a little "generous" with my strips and have to rein myself in... 

macpac (not verified)

oh thank you.  I'll let you know how it goes.  Have to wait till I get to the "big" town to get thread for the warp before I start so it could be a couple of weeks before I let Ya'll know how it goes.

raggyb (not verified)

I would be inclined to cut with the rotary cutter, rather than tear on denim - although tearing works great on lighter weight cottons. Wear a dust mask if you are going to do a lot of tearing.

Whether to sew ends together or not, or to measure precisely, depends on how funky a look you want. I don't mind a raw edge sticking out here or there in an overlap, or some variation in the weft thickness - but you might.  Do whatever you prefer. 

Have fun!

Barbara

macpac (not verified)

All opinions welcome.  I am such a newbie I haven't even started the project.  I did rip some denim and I do like the look.  I'll keep in mind not to do all the denim and make too much dust.  I'm trying to pace my enthusiasm.  Ordered heavier warp and it should be here tomorrow.  So look out, I bet I won't be able to control myself.   

francorios (not verified)

denim minirub

Mini-rug 12"X23" made from denim rag strips,
handwoven on Erica rigid heddle loom
 
I used 1 inch wide strips that I cut with scissors by spiral cutting around the legs of an old pair of denim pants, left the hems on it, did not fold the strips any particular way, just kind of mashed it by beating it with the heddle. Don't do that! I was lucky not to break the 30 year old plastic heddle, use a beater stick.
 
The warp is an old cotton warp that was on the loom when I got it.
 
This is how the rug looks after washing.
 
I hope that info helps.
 
Have a good day!

tracyjayn (not verified)

I have lots of old Levis...  funny thing, I am still growing.  Round now not tall...LOL!  I am going to have to strip these and give this a try next.  I love your mini rug Francoise.  I have a laundry room that needs a rug. 

Thank you for sharing.

Submitted by Anonymous (not verified) on