AAAAAAAAAAAAAAAAAAArgh!

there.

I feel better now.

I've been struggling with my current project - it has meant that my original plan had to be scrapped to revert to good ole' rigid heddle heddle - no problem there - except the enormous amount of lost time.

HOWEVER, and this is really puzzling me.

when I make a shed to weave the upper layer sags to the point of being impossible to pass the shuttle through. I can't explain it. I've re-tied the warp four times now. The tension when in neutral is even and just right. But open a shed and *poof* everything goes to hell.

I've had to un-weave my first few rows multiple times now and am very close to saying bugger it, and taking the whole thing off the loom and starting over.

I've never had this happen before and am really stumped.

Ideas? Suggestions?

Comments

claudia (not verified)

Sure, breathe deeply, several times.  Now, what yarn are you using and what loom? What are you making with it?  I am unable to give even educated guesses without more information and a little picture of the "Sagging" problem would be enormously helpful.

It's not you, my guess is it is the yarn and the sett. Are you using an 8, 10 or 12 dent reed?  Did you trying wrapping the yarn around a ruler before you started and then dividing the total number of wraps in half to get your sett?

Happy to help if you can give a little more info.  We'll help you figure it out.

Claudia

debmcclintock

 Is this the one in your projects that says clasped weft?  What are those dowel rods that are in front of your heddle for?  Claudia is right a couple of photos would be helpful either here or here linked to your blog.  Please pick up the camera BEFORE you pick up the scissors. 

On your clasped weft project it looks like your heddles are made with very thick cotton.  Look at some kite nylon string, it comes in different weights and would "slide" against your warp.  Good luck.  I'll look for those photos for you that we wrote about in your other project. In the meantime, here's a diagram at this link, see comment # 3.  Deb Mc

Thumper70 (not verified)

Thank you both for your help.

Well . . . .

Mystery of mysteries . . . the sagging . . . .stopped.

Sorry I don't have pics of the sagging - I did not think to take one. My note this morning was in frustration & despiration. But to describe it - the lower part of the shed was nice and taught but the upper part sagged, no "dangled" into the lower weft so the "shed" was almost non existent making it impossible to pass the shuttle through.

This afternoon I carefully wove about 3cm with the sag happening all the way through using a long shuttle as a pickup stick/"heddle helper" - then *poof* it stopped. Now, no sag, everything is normal.

I'm completely baffled as to the cause - and would like to know so as to prevent it from ocurring again.

I'm using linen, on a 10 dent (I think that's the one its either 10 or 12) rigid heddle reed. No on this occasion I did not do the ruler trick.

Deb - yes, the "cotton" string heddles . . .not the best plan! he he he. I'm planning to try the nylon next time. And thanks I'll be sure to look at the diagram you've provided - that may also illumine mistakes I'd not realised.

I've just posted an update with picture of the work as it is now to my blog here.

Thanks again for your help - any ideas as to the cause and prevention - greatly appreciated.

Oh and next time - I'll take pictures of the mess when it happens (grin).

djfiberarts (not verified)

That is weird. I have been having a hard time with the warp I'm doing for a learning piece I'm doing now, sort of similar to your problem. But the bottom of the shed was sagging. I had to retie the warp twice. I just couldn't seem to get the tension right. I'm using a 8/4 (I think) mercerized cotton. Anyway, as I started weaving and using the pick up stick it got much better. What do you all think I did wrong? I have a feeling it is the warp I'm using.

DJ

francorios (not verified)

DJ, did you have the rigid heddle in the neutral position when you warped the loom?

I think if you have the heddle in the up or down position when you warp then one set of warp will have a little slack in it.

Just thinking out loud.

Have a good day!

djfiberarts (not verified)

Yeah, it was in the neutral position. I'm wondering if it is because the cotton is mercerized. It seemed real slippery in the tie up...just didn't want to hold the knot. And I just never could get a good handle on the tension. But weirdly enough, it does seem to be correcting itself as I weave : /

DJ

Submitted by Anonymous (not verified) on