HI All.....I recently had a painted warp on my loom and was working on the last piece when I realized I would not be able to forward the warp enough to get the length I needed out of the last piece.  I debated and thought about what to do about the problem and came up with a solution.  I had posted my query on WeaveTech and got some good advice and thought you all might find yourselves in a similar situation,  so I decided to post my problem and solution here. 

I put some photos of my warp extension experience on my website if anyone wants to see.  Unfortunately, I forgot to take a photo of the lease sticks in the warp and in the extension warp so I could tie the knots.......if you want to see how I managed to eke out and extra 10" of weaving from my painted warp, go to www.subudesigns.com  When you arrive, click on Gallery, then in the drop down box choose "extending a warp" (it is at the bottom).  Then click on each individual photo to get a closer view.

Here is what I did to solve my problem:

1. Had to figure a way to extend the warp so I could weave up to 10" of the
loom waste.
   a. Warp was fixed to a rod which was slipped into the tabs of the warp
beam apron.  This meant
       the warp would only extend to the rearmost shafts, and I needed more.
   b.  Determined I had to extend the length of the warp so I could get the
full weaving length.

2. Determined the warp had to be extended thread by thread.
   a. Threads had to go thru heddles.
   b. Wove the warp until the apron rod came up over the back beam

3. First step was to wind a warp of the extension threads.  I wound a one
yard warp (originally I did 30" but before cutting determined it was not
enough).  I kept a thread by thread cross in this warp and kept the other
end uncut.  I tied off the cross and transferred this warp to lease sticks
secured to the back beam of the loom.

4. Before cutting the warp, I treadled the tabby sheds and inserted dowels
into the tabby sheds behind the shafts.  I tied them securely in place so
they would not move and would not jeopardize my threading.  Once the dowels
were fully secured, I cut the warp from the apron rod one bout at a time.  I
tied that bout in a slip knot so as not to lose my threading order.

5.  With lease sticks and dowels secure, and my threading order for the warp
and the extensions in good order, I started at the left and tied each
extension to each warp thread in order.  This operation took less than an
hour, as I had 180 threads.  I was going to tie weavers knots (and did in
several threads) but quickly realized that they were taking up more of the
warp that I cared to lose, so switched to overhand knots.  These are secure
and easy to tie.  I took the advice to keep the tails very short and most
did not exceed 1/4".

6. When all knots were tied, I separated the warp into four sections and
made sure the weight would be evenly distributed on each thread by combing
out the extensions and tying a slip knot at the end.  Then I weighted each
section with a large S hook and several large washers.  Total weight on the
warp was about 15 lbs.  When I attempted to weave, I discovered this was not
enough weight.

7. Having to add weight, I decided to use water jugs.  I combined two
sections that I had previously weighted and tied a slip knot in each.  Then
I used a large S hook to attach a full gallon milk jug full of water to each
section.  This was precisely the amount of weight needed for me to continue
weaving.

8.  Weaving went exceptionally smoothly.  As the knots began to enter the
heddles, there was little resistance and no shedding problems.  For the last
6" of weaving, the knots had been forwarded to enter in all shafts numbered
6-14.  Most sheds were quite clean, with the exception of the very last inch
when the tabby shed created by lifting shafts 3-24 was a little sticky.  A
quick strum of the warp cleared that away and the weaving was finished
without incident.
 

Hope this helps if anyone finds themselves in the predicament that I was in.......the pieces are now off the loom and wet finished and I am very, very pleased with the results!

Su :-)

 

Comments

lkautio (not verified)

Nice write-up of the process.  I've had to do this (once or twice) and it was not fun, but workable.  In my case I put on a longer second warp, and was able to get a bunch more pieces/samples off it.  I was too lazy to go through all that work and not get something from the extra warp!  I think I hung weights initially as you did, rather than beaming, then cut off in front of the heddles when the interrupted piece was woven and beamed the warp by pulling it forward then rolling it on.

Laurie Autio

Su Butler

Hey Laurie......I really debated about adding enough extra warp to weave something, but in the end decided that all I wanted to do was save the painted warp.  Had my warp been wider, I think I would have opted to add additional warp and weave something else too.   As it was, it took about an hour to wind the extension warp and tie the required knots.....for me, that was not too much effort to save the piece with no other reward.....<g>

Good idea to cut off then beam the remainder of the warp......very efficient!  I'll add that to my notes so if and when I ever have to do this again, I can be more productive!

Su :-)

lkautio (not verified)

You probably are faster at all the steps than I am <g>  The last one I did was in the 450 threads range, not terrible, but enough to make me lazy.  I know some people use a dummy warp with all unique (handpainted, etc) or expensive warps, tieing it on at the beginning so they don't lose an inch.  I don't have enough patience for it.  On the other hand, I bought some real gold, silver, and platinum threads and may use one for those.  For now, they ripen.

Laurie Autio

Su Butler

LOL!  I have some real gold yarn "ripening" here too.....I keep intending it for Christmas cards, then never get around to designing a draft that I feel is worthy enough for it.....<g>

I don't think I am any faster than you....I had a mere 180 threads to deal with, not 450.....I probably would not have bothered with a wider warp and found a different use for the swatch of fabric I had already woven.

I usualy paint my warps with some of the waste yarns left unpainted........so I don't bother with a dummy warp......in this particluar circumstance, I had wound the warp and dyed it a looooong time ago.......I usually do my painted warps in batches and label each one with my warp length, sett and intended purpose......somehow this one was unlabeled.....so I had to guess.....during beaming I estimated I had 16 yards, enough to make the pieces I wanted....but an afterthought remineded me this was inteneded for a loom that has considerably less waste required than the one I chose to weave the project on.....and guess what?  That waste was the amount I was short for the project......my own dumb fault......<g>.

 Live and learn.......<G>

Su :-)

Submitted by Su Butler on