I am amassing my books to delve thru words to try and understand designing a curve in satin for my 24 shaft loom. Actually I plan to do a basket weave on the edges so I suspect I am looking at only 20 shafts for the curves.

I am trying to wrap my mind around making a clean cut in a curve. Is such a thing possible? I've got the principle down for how you treadle for square blocks. Doramay Keasbey covers it nicely in Pattern Techniques on page 121. My next stop is the Woven Pixel by Schlein and Ziek. I can design something with a curve and manually tie down opposite where I need to. I am also going to look thru magazines for a satin curve to see how someone has handled the transistion. I am looking for guidance on words and phrases I should pay attention to I read thru these books and other sources. This is a new structure for me so I am trying to understand counters and clean cuts. Any other books or favorite articles that address my question. Thank you in advance for any brain biscuits. regards Deb McClintock

Comments

tien (not verified)

Hi Deb,

I assume you are talking about sharply defined curves rather than the soft ("blurry") curves to be found in network drafting?  In that case I think you would be best off using the Photoshop techniques in The Woven Pixel, as it's a lot faster than creating the draft manually, square by square.  If you run into problems with it, let me know and I'll see if there's anything I can do to help.  I'm by no means expert in the technique, but I did use the method to create my Double Happiness draft, https://www.weavolution.com/draft/double-happiness-symbol , which is an 8-shaft satin set against a 4-shaft broken twill ("false satin").  If that's feasible, then doing simple curves should be pretty easy.

If you want larger curves, though, you'll have to go to network drafting; the Woven Pixel pretty much assumes a straight draw, so if you are doing basketweave selvages your motifs can be a max of 20 threads wide.  Alice Schlein has a good book on network drafting as well, and it's available as a print-on-demand via her website.

Will basketweave selvages work with a satin draft?  I would expect there to be different takeup between basketweave and satin, unless you are doing more than two threads at a time with the basketweave.  Great way to avoid that satin curl-up at the edges, though!

Tien

debmcclintock

 ahhh, network drafting, that technique is also on my list.  It looks like I'll need to visit lulu and order Alice's book. I am primarily a weft face rug weaver so I am backing into this multi-shaft experience....I am familiar with the photoshop technique and love it.  I am just looking for a deeper understanding on how to tweak the curves.  

Keasbey and several other folks do advise using basket weave with satin since they had the same type takeup.  I try to listen when I run into that type of advice from folks who know. I don't know it personally yet but I will!

My goal is to weave some thoughtful samples so I can see if what I am reading works out the way I think it should.  I neglected to mention I am also using Bonnie's book (I'm up to chapter 4) Exploring MultiShaft Design to broaden my knowledge at the loom.  Bonnie also touches on network drafting.

So, back to my books!  Thank you for the pointers.  

 

BonnieI (not verified)

Network drafting works well with satin. For a smooth curve in satin, start with a straight draw threading and a liftplan design. If you are not already familiar with PhotoShop, see if your weaving software does something similar. WeavePoint and FiberworksPCW both have tools that will overlay a dark satin in the dark part of the design and light satin in the light part. For a wider repeat/ larger design, advancing twill threading and network drafting are the answer. Those give shaded edges. Chapter 5 has more on network drafting.

It is quite possible to weave weft-faced rugs with these methods. Double-faced twill or weaving on opposites do the trick.

Bonnie Inouye

debmcclintock

 Hi Bonnie, thanks for the words, here and in your book, they are all helpful.  You'll appreciate this.  I am noodling out some of the network drafting and was looking thru your workshop you gave for Philly back in (gasp) 1998.  Ouch, it was that long ago. That was just as I made my jump into Southeast Asian weaving and got diverted from multishaft design.   We've finally made our move home to Texas and I have my 24 shaft loom so now I can work on some meaningful (to me) curves and network drafting!  Since I am only in chapter 3 of your book, now I can't wait to get to Chapter 5!  I'm real bad in jumping ahead of myself! Wheee!  Deb

BonnieI (not verified)

If you were taking a course, Introduction to Multishaft Weaving, and using my book as a textbook, then you might be required to follow assignments in the order given. I have heard about some classes using my book and also quite a few weaving study groups have spent a year or two working through it together. 

On your own, you could skip the rest of chapter 3 and do chapters 4 and 5 sooner, sure!  Chapter 4 is relevant to your desire for curves and satin.  With a 24-shaft loom, sometimes broken twill is a good substitute for satin.

What weaving software are you using, Deb?  Are you near other weavers?  Bonnie

debmcclintock

 I am using Weaveit and Weavemaker.  Weaveit is more intuitive for me to use.  Weavemaker is confusing.  It seems to be aimed at mill work rather than the handweaver.  Working thru your books exercises does exactly what you meant them to do, get the weaver comfortable wit the software and work thru the technique.  Thank you!  

debmcclintock

 Here is my first pass at my satin gamp

www.weavolution.com/node/6914

Once I get my decisions made I'll post all my book/people resources I used to get myself up and running on satin.

My biggest problem is my selvedge, I just cannot get it to catch using Doramey's selvedge or a basket weave selvedge.  Thinking about dropping back to a floating selvedge.  grump!

 

debmcclintock

I just posted a photo of my 5 end satin gamp in projects and a pdf of my sample exchange worksheet in drafts.  My focus was understanding the basic weave unit and understanding how to construct the cloth while creating movement. Thank you to everyone who give me advice and pointed me in different research directions.  For future reference here are the books and magazines I ended up using that "spoke" to me and helped me get grounded in some overall basics.   

Satin Bibliography – from a multi-shaft beginner‘s point of view for structure

Pattern Techniques for Handweavers, Doramay Keasbey, pp 119- 132, ISBN 0-9611136-2-6

The Complete Book of Drafting for Handweavers, pp 69-76, ISBN 0-916658-51-1

Exploring Multishaft Design, Bonnie Inouye, Chapter 4, 5, & 10, ISBN 0-9678489-0-3

The Woven Pixel: Designing for Jacquard And Dobby Looms Using Photoshop, pp 65 – 70, p 95-96, Alice Schlein & Bhakti Ziek, ISBN 0-9644474-1-X

Weaver’s, Issue 4 Winter  1989, Half Fun with Damask, Doramay Keasbey, pp 26

Here is the gamp:

Submitted by debmcclintock on