I was wondering if anyone in this group has blogged about their backstrap projects.

Please let me know so I can add you to the blogroll on my new blog.

backstrapweaving.wordpress.com/

So far, I have Franco's, Jeannine's, Kimo's and Virag's blogs on there.

 

Laverne

Comments

mischiefmanaged (not verified)

I've been keeping a blog with a long-time friend for a couple of years (she lives in Arizona and me in Wisconsin). It is named after her wool-obsessed cat and is mostly about our crafting adventures. I just did a post (the first of many, I hope!!!) about backstrap weaving:

http://knit-n-spinninkitten.blogspot.com/2010/01/on-weaving-and-weary-mind.html

As you will see, I'm a bit stuck and welcome any suggestions from weavolution members, either here or on my blog! Cindy

Caroline (not verified)

Hi Cindy, the first thing you need is a solidly reliable warping board. If your board is otherwise OK, glue that wobbly peg back in because that is only going to cause more grief, and make sure it goes in straight!  Continuous warps are not as  forgiving as the warp on a rigid heddle loom, although you could take a leaf out of loom warping: when I warp my RH loom I tie knots in the warp at the front beam then use strong cord to loop those knots onto the beam. Sounds complicated but it works wonders for an even start! Its no good if you are wanting to start with a  selvedge, but if you are happy to have a fringe its great. PM me if you want to know more.

Otherwise you can hang bits of nuts, bolt, nails and or fishing weights off the back of the loom to keep the loose warps tensioned, but if you don't have equal tension on your warps, it all flows through into the weaving, and to get even tension you need to be able to get each warp thread exactly the same length as the one next to it, and that takes practice. Remember that the people in the videos on YouTube have been weaving since they were kids, so they make it look soooooooo easy!  And Laverne has been at it for years, so she makes it look very easy too, lol! The rest of us do fringes, and hem our pieces.

bolivian warmi

You mention a loose warping peg......I can't stress enough the importance of having the pegs in the warping board, or whatever you are warping on firmly grounded. If you notice that a peg is leaning, STOP. Unwind your warp, fix the lean and start again. Don't think, well I'll just deal with that once it is on the loom or, well it's just a few millimeters, no big deal.

The uneven tension is guaranteed to make you miserable.What do the Navajos say? something like..........what starts in beauty, finishes in beauty..........sorry if I have misquoted that., but it is true. Work on getting a rhythm when you warp and a good even tension-no interruptions!

This is an ancient photo! This is the first weaving I made after my first trip to Peru to study with weavers there. My warp is tied onto the bottom bar of my Navajo loom but check out the far end loom rod-now THAT'S a crooked warp!! A seriously leaning warping stake.I obviously hadn't sorted out a good warping system yet. At least it was consistently crooked and I managed to compensate. So it happens to everyone Cindy-first and foremost, try and improve your warping board.

Laverne

ps........I see you have finished a couple of bands and they have already been snapped up by your kids-give yourself a pat on the back for a job well done! :-)

claudia (not verified)

The backstrap group has been invaluable at helping put Weavolution on the map, er..web. Anyway, I get a little nervous when I see you moving off here and onto your blogs. I hope you will all continue to use Weavolution and continue to add all your beautiful projects to your notebooks.

Claudia, Weavolution co-founder

bolivian warmi

No one is moving off anywhere!!! i am afraid you are stuck with us Claudia!! :-)

claudia (not verified)

Whew!

At one point this afternoon, I checked the Hot threads and every single current comment was from a thread in the Backstrap group. I think you are the busiest person on Weavolution.

And that's why we love you!

Claudia

bolivian warmi

lots of backstrap weaving going on out there. Isn't it great although I only advanced two finger widths today!!

franee (not verified)

I take a full 'session' just to set up my little projects, and don't get time to weave until the next day lol.

Aunt Janet (not verified)

I had a leaning warp recently.  it was the widest piece I had done yet, and now I realize for wider pieces I can't use my warping board because as I get out away from the board the pegs begin to pull in.  However there I was with the leaning warp.   I cured the lean at the beginning of the piece.  I wove with the warp slanted at my near end, but wove it straight instead of following the slant.  After weaving for an inch, I took out the near stick and reinserted it into the warp above the inch of weaving.  I was all straightened out, with just a few inches of waste.

Aunt Janet 

bolivian warmi

Me too Fran. I like to have everything ''just right' before I pass the first weft. I was very much impressed by my Guatemalan teachers who take great care to have every single warp straightened out across the loom bar. They lift every warp one by one and lay it straight on the bar. They also measure the width many times as they set up until everything is in its place and they are ready to start.

I make sure I do the same now-lots of measuring and straightening. It's definitely worth the effort.

Laverne

bolivian warmi

That was a great solution to the leaning warp, Aunt Janet.

When I am making a wide piece, I just warp it in sections-no more than two because I don't weave anything that wide. You just take off one section and slip it onto the loom bars and then start warping again and slip that lot on the bars-it's very easy.

Aunt Janet (not verified)

That makes sense.  That is exactly the way I'll warp my next wide piece.

Aunt Janet 

bibi (not verified)

well, that doesn't make any sense for me ! can you show pictures of how you process ? because I will soon try wide piece, so I'll be very happy not to suffer too much :)

Michelle

bolivian warmi

Let's make deal bibi-you show me your 'waves'', I'll show you the process!! :-)

Laverne

edit.........oops I just found your waves on the other thread! Okay, now I owe you some pictures!

bibi (not verified)

I got you !!! lucky me, I posted the pictures just before I ask you a favour !!!

Michelle

Submitted by bolivian warmi on