Hi!   I came across the tutorial for Backstrap Basics on WeaveZine and have been obsessed with hunting and gathering to build my own loom since watching the first video. I have blogged my shaky beginning here. :)   I need to update that progress report actually, as after deciding to give up on my first effort because of the matting and piling going on beneath the heddle strings (operator error /bad yarn choice), I decided to restring the heddle using the same as used in the warp. I wrapped them around my hand rather than wrapping & locking onto the stick this time. The back seemed to open better, but the front was giving me trouble, so I retied them for a 3rd time onto a stick. So far so good - I think - not saying it too loudly until I try weaving a little more.
Trouble spots that still need work:
  • Learn how to tie onto the dowels right so the entire thing doesn't unwind. Did NOT pay enough attention to knot tying lesson in Girl Scouts, I guess!!
  • Find a better shed rod for the back. The ginormous wooden knitting needle rolled around & slid from side to side too much. Maybe drill more holes so the safety string is closer to the width of the weaving?
  • Find something more stationary to tie onto! Although if I can get the dowels to stop unwinding, I can push back with my feet. I think!
Laurie in Maine Happy to have found you!

Comments

bolivian warmi

Hi Laurie!

We are not ignoring you. This thread somehow locked itself but all is well now-thank you Alison!!

I just opened a new FAQ page to show you how to deal with that pesky shed rod. Don't worry it is a common problem and I have posted step-by-step phoos to show how you can get it locked into place. Here's the link..........

www.weavolution.com/node/7259

 

There is another FAQ showing how to roll up your warp-very easy and that will stop everything from unwinding on you. This was on one of the WeaveZine videos-you may have missed it. Here's the link for that one..........

www.weavolution.com/node/6112.

Yes, good knots are essential. I always use the one my Navajo weaving teacher showed me-don't know what it is called-the one where the rabbit comes up the hole and goes aroud the tree.............Anyone know the name for that one????It allows you to tie off while maintaining tension on the warp thread. Hmmm......might take some photos of that.

Try to find a nice firm tie up spot and make sure you are comfortable. Pushing against a moving tie up place with your feet works-I tied up once to a light weight writing desk and did just that but it can get tiring!

Thanks for sharing all this-good stuff for everyone to know and you prompted another FAQ page and thoughts about a knot tying page which is great

Laverne

 

 

 

mischiefmanaged (not verified)

Hi Laurie, I've had several misadventures myself but everyone on this forum is very helpful! You have come to the right place.  The FAQs posted here are very useful, and there's one to address your question about what to tie onto.  I'm making some simple straps right now to put on a knitted bag (it started out with knitted straps but of course they stretched) and then I'm thinking about trying a small bag or maybe experimenting with color.

Cindy

franee (not verified)

Hi Laurie,

I just had my first couple of days of weaving too, but luckily went and picked up some cotton and attatched a couple of hooks under my window sil, so didn't have to fight the yarn or the stability issue.  My major problem was when doing stripes I could not get it set up at all! I'd think it would be ok but then there would be one or two threads in the wrong spot and only discovered after doing the heddle grr. But after about 3 trys I managed to get it working - yay.

Fran

bolivian warmi

We should rename this thread the ''thread of mishaps and misadventures!''

I had my own mishap last night which I will share. I warped up a narrow band just to take some tutorial photos. The tail of the starting end of the warp tied to the loom bar was too long so I went to snip it-grabbed the wrong side and ended up cutting the warp-Aarrgh! Well I tied it back together but it messed up the tension and looked ugly in the picture-moral of the story-don't warp at night!

Laverne

A big ''yay'' for all of you for being resourceful and tenacious and managing to solve all the little problems and thanks for posting them here so we can all help each other out.

 

Caroline (not verified)

hi Laurie, I think every one of us has had problems with stability at some stage or another. I've found that when you are weaving narrow pieces it pays not to have your sticks too wide - its not always a case of one size fits all!

Also, I've experimented with

  • hooking up to the window frame - fine as long as its sound!
  • using my inkle loom and using my feet to steady it and keep it in one piece - not the best. I really did have stability issues here, especially if I sneezed.
  • using a kitchen chair opposite me and stretching my feet out and bracing them on the back of the chair. This was the best!

AuntJanet has photos of her set up on one of these longer threads, which is what inspired me. I substituted a bungee cord for my trusty S hook and looped it around the back of the chair and put the hooks at the notches on the end of my back stick - it kept everything beautifully stable, and meant I didn't tip things over when I sneezed. Its truly forgiving! It seems to even the tension out so that sudden involuntary movements don't upset the heddles, etc, so this is what I shall be using in the future, regardless of what i tie up to. This is a new strap so the elastic is very, very tight.

I have also experimented with using knitting needles, and I'm not very impressed - I prefer dowel. This may be because of the high polish finish on the needles - after all they are designed to slide through the yarn easily. fine for pick-up sticks, but hopeless for heddles. Franco swears by chopsticks.

Of course, none of this may work for you, but it should help with thinking outside the box a bit and help you see the potential in things you may have around the house.

Keep smiling even if your teeth are gritted sometimes - the end result is well worth it!

francorios (not verified)

 

 

I tied a loop of rope on the end beam and use my feet to hold the loom.

That might help.

Have a good day!

dognapper2 (not verified)

(mis)Adventure UPDATE:
 

I cut off the 1st set of heddle strings and prepared to scrap the project. But I had carefully saved the cross as I considered whether or not it was worth a try to change out the heddle strings to match same as warp.
 
I FINISHED it!   Not sure I did the braid ends right but it is D.O.N.E!!!   
It's a little "primitive" as my daughter said "I like it...it looks primitive." :)
I can accept that!
 
Weaving did get easier, although after a few inches started matting up again. The first & last warp (the ones that had a slip knot to start with) were not the right tension - too loose - and contributed a little to the funky edges. Along with all the other things that this beginner did wrong, I'm sure.  But I'm so pleased to have completed it rather than quit.
 
I was wondering about an extra cross - to control the sliding around issues, of both shed rod & the ends themselves. I thought I might have missed a step. I drilled extra holes in the knitting needle I was using as a shed rod and it seemed to help.NEXT TIME I will add the extra cross in the back to see if it will help with stability.
 
THANK YOU for the wonderful introduction to this art!! Your blog, articles and tutorials are amazing. Above & Beyond HELPFUL. As well as the supportive community I've found here. Thank you all... I look forward to following the helpful advice offered!!!
 
Laurie in Maine ;)
 

Caroline (not verified)

Laurie, that looks good! Please put it on the projects page. Its good to have a record of how we progress.

Your selvages will come good - its something every weaver has in common, and we all struggle with it. The more we concentrate, the worse it seems to get, so its probably something we should not obsess about.

Have you fulled/washed your scarf yet? You will find that once that has happened, a lot of the faults you can pick out now  will even themselves up, and that the selvages are not nearly as bad as you think. Also, remember, you might know what went wrong as you were weaving - its not nearly as obvious to the rest of us, so give yourself a pat on the back! Well done!

franee (not verified)

It looks lovely! I'm so impressed that you kept going, you have a right to be proud. :D

I also have problems with my edge thread getting looser as I go and I can't blame the knot, because it is definately not slipping :)

Fran

dognapper2 (not verified)

Yes, you are right in saying "you might know what went wrong, but..."!

The picture shows the 2nd half of progress in the top fold. I can see improvement, but also exactly where heddles were changed; where they started acting up again. A couple of places where a sticky warp was out of place or more tension issues.

In the lower fold I see where I moved (smooshed?!) rows with my finger and they all moved in a wavey line :) Possibly a couple of places where I opened and closed a cross without throwing the shuttle through...not sure but it felt like I might have at done that a time or two.

Eagerly looking forward to the lesson in 2 color work ...will actually try sticking to the Beginner Lesson 1 page!

Laurie in Maine

rose Goldielocks (not verified)

Looks great!  (much much better than my first try, which got rolled up in a bundle and shoved in a corner for a couple of years!  I moved on to inkle with, and came back to backstrap ... by that time, I knew how to deal with sticky heddles/sheds)

Handwash the textile, and let it dry, and then look at it to see if you can still find the problems, but remember, normally only another weaver/textile person can pick such subtle changes up.  Be sure to measue the backstrap before and after washing, and keep a record (the projects page is great for that!). Next time you do plainweave on this kind of yarn, you will know how much it shrinks after washing!

 

bolivian warmi

Hi Fran,

The edge warps get slack for everyone-it's not  just you so don't worry, this is normal. As soon as I get my warp onto the loom and have made my heddles , I untie both the edge warps from the far loom bar and retie them almost too tight. You may have to get someone to help you by holding the near loom bar under tension while you untie and tie the knots at the other end.

If they get slack while you are weaving, the easiest solution is to slip a dowel rod under them and tie the dowel to the far loom bar. I have dowels of various thicknesses, so if the edge warps are just a little slack I use the thinnest dowel. I have kebab skewers that are pretty thin and they work well.

If you just leave them getting more and more slack, this will be a problem but, as you can see, there is a simple solution.

Laverne

bolivian warmi

Good job Laurie!

It's a really pretty color too and I am glad you got the thumbs up from your daughter! I am going to put this on the backstrap group's main page-there is a little gallery of completed projects there.

I am going to make a FAQ page for loose edge warps too.

Thanks for posting this for us.

Laverne

Caroline (not verified)

I use small fishing weights to keep unruly warp threads under tension. They come in all different weights and sizes, and all have a hole in them, through which I stick a jewelry wire finding to make a loop I can use to attach it to the warp/s that need the extra tension.  I have also used a fishing weight when I have missed a warp. The missing warp is wound around a little paper bobbin, weighted then it hangs over the back beam independently of the rest, but under the same tension. You could also use the weighted wooden bobbins used for kumihimo - they are much prettier.

franee (not verified)

Hi Laverne,

Thank you so much for letting me know it's not just me :)

I have to take a photo today of my progress, I have been going in the order of the tutorials and am finishing my piece from Tutorial 3 - one weft double weave - it has been a steep learning curve!

Fran

bolivian warmi

Steep learning curve!! you said it! I can't believe how fast you are getting along. Good for you! Besides the mug rugs, I have some other one weft double weave projects to show you . One is on the loom now and about to come off.

Can't wait to see your photos :-)

Laverne

bolivian warmi

Hi again Laurie,

I saw on your projects page that this yarn is TLC cotton plus. Can you tell us a little more about it? Is this yarn readily available? How thick is it in wraps per inch? Other beginners will find this information useful as yarn selection can be difficult unless someone gives you a specific brand name.

Thanks!

Laverne

francorios (not verified)

Good for you!

I think it looks great. The braids look fine too.

Every piece builds experience toward the next piece.

Edges are one of those things we are continually striving to perfect, or at least improve.

Have a good day!

bibi (not verified)

 lol, in yours it's a rabbit ??? in mine, as I was taught by my nautic teacher, it's a snake which comes out from the well , goes around the tree and go back into the well ! I know the name in french : "noeud de chaise" which if you translate word by word would make "chair knot"... does chair knot exist in your language ???... checked into the dictionnary and it seems you call it a "bowline" !

HAPPY NEW YEAR EVERYONE !

Michelle

bolivian warmi

Hi Michelle,

So you say ''snake''-now what in the world has the snake got to do with a ''chair''!!-curiouser and curiouser........

Well I have heard of a bowline knot so I guess that is it-a very nautical name. Speaking of nautical....how are the waves going?

Thanks for that!

Laverne

bibi (not verified)

euh... well... I just repeat what I've been told... and I do agree with you, what on earth a snake coming out of a well has got to do with a chair ???!!!  and all of this to be used on a boat !!

my wavy waves are waving quite well... I was very busy packing all my stuff these last days, so I didn't wave much, but, I'll do my best to show you very very soon... as soon as light comes back (it's already night here )

bibi (not verified)

Hi Laurie !

I've just read quickly your first attempt ! Bravo ! you did it ! I do understand your sorrow to get with it ! I did try sock yarn like you, because, I don't know where someone dare wrote that it was fine for weaving ! that was my pink and black try (there is a picture somewhere here)... that became very quickly a nightmare though I weaved a very thin strap with it... I don't know how you managed to weave so large and so long with this grrrrmmmm yarn !!

so, knowing this, I just only swear with mercerised cotton now... and life became so easy since then...

good luck for your next weaving !

Michelle

 

Submitted by Anonymous (not verified) on