I need HELP!

Last night I was putting a warp on my jack loom for shawls, it's the longest warp I've done (10 yds), but I put tons of ties in it, and chained it carefully so it wouldn't get messed up.   I am warping back to front.    this is only about the 5th project I've done, and all the other warps were short.   My husband provided the tension while I beamed it, but now that I've put the lease sticks in, there is a tangled mess where the threads coming out of the cross are nowhere near the location on the warp beam, so they are crossed and it all looks like a mess.   In this picture, I am holding up the lease sticks in the front of the loom, so you can see what it looks like.   What do I need to do?  Is it salvageable?

Thanks in advance for any help you can give this newbie weaver!!

Deb in N TX

 

Comments

debmcclintock

 Deb, it looks like your cross flipped in one section when you put the leases stick in....you can fix this carefully,  tie the threads on the left to secure your cross (just in case)....tie your messed up threads(technical term) to secure your layers.  CAREFULLY remove your lease stick and on the right hand side and flip the threads so they line up properly from your reed.  Put your lease sticks back in on the right hand side.  I think you can save that bunch on the right.  The ones that are in the middle might need fiddling....the Hill Country Tx Deb

claudia (not verified)

Deb,

I concur with Deb, it's not as bad as you think. I like her suggestion and concur, just tie the warp in all four places in front and in back of the cross and separate the right and left sides and you should be fine.

The other thing I learned to help avoid this is to run a string through both sides of the cross and then tie it. Then, when you are ready for the lease sticks, you lift each end of that thread and with a little shake and some tension, you will be able to see both sides of the cross more easily. I will see if I can either create or find a diagram to demonstrate it. Or, I will take pictures of the warp I am about to put on my loom so you can see what I mean.

It looks worse than it is, I promise.

Claudia at Weavolution world headquarters in MD. (LOL)

Michael White

Deb, the best thing you got going for you is the warp yarn looks all the same. The reason to use a cross and lease sticks is to allow you to pick up the yarn in the order of your draft. What you need to do is just remove the lease sticks(and not use them for this yarp) and using your fingers or a comb work the yarn out and then put in on your raddle. Do not be discourage, dressing a loom is an art. Cheryl and I put on 17 yard warps offen back to front. One last thing, back sure you tie up your cross in one inch groups the way you want then to go on the raddle. Also do not use a lot of ties on the overrall warp, few is better then morer( a new word).

Have fun and remember to thank your better half for his help.

Michael

Martha-Weaves (not verified)

 Deb-  I agree with Claudia and Deb M., use the methods they describe and you will be able to salvage the warp with few problems.  

Not wishing to sound rude, I disagree with Michael, using choke ties on your warp every yard or so during the warping process helps to keep threads in place - keeping those choke ties in place until the warp is wound on to the warp beam and only removing them when they reach the warp beam is one of the many keys of a tight, orderly and evenly tensioned warp.

 Keeping the lease sticks in while you repair the turned threads is also important - the lease sticks will keep your threads in order - removing them now will only increase your problems.    I am of the opinion that combing the warp leads to problems.  Tie off the cross above and below both in front and behind the lease sticks - remove this package of threads - turn the package until all threads are now going the proper direction - insert back onto the lease sticks - continue threading.  

We are have experienced this problem from time to time, no worries ... your project will turn out beautifully.

Happy Weaving, Martha

Michael White

Martha, Hi, I did not say not to tie the warp. A tie every yard is good, a tie every few inchs is over kill and will lead to cross and twisted threads.

Michael 

debstein (not verified)

  Do you remember what this mess looked like at the beginning?  I was able to get it straightened out and finished the first shawl from the warp - here is the end result!!

tien (not verified)

Congrats!  That looks beautiful.

Ellen (not verified)

Oh, that is just great. A real suspense story with a happy ending!

And a really nice shawl, too!

TinaHilton (not verified)

Isn't it funny how sometimes the worst beginning can end up with a great woven cloth?  It looks like the extra effort was worth it!


debmcclintock

 Hi Deb, your finished project is beautiful!  Almost worth the suffering in setup?  Did you figure out how you got into trouble.  Do you think it was the twisted cross?  Any other words of warnings for others.  No big deal, if you don't know, the journey ended safely!  regards  Deb Mc

apw1970 (not verified)

Hi Deb.  Yippee for you! 

I love that shawl pattern.  I have made two of them in the same pattern; one for my wife and one for a colleague.  

Submitted by Anonymous (not verified) on