Has anyone used a Louet David loom? Do you find the treadling difficult - hard to press down because of the springs? I am considering purchasing a used one but it seemed the treadles were stiff to depress when lifting more than two shafts. Any feedback about the loom would be appreciated. Thanks.

Comments

Ellen (not verified)

Weavolution has not got so far with their looms section yet. Ravelry.com has a looms review group. If you don't get answers here, you might try looking in on that.

Frances G. (not verified)

I bought a used Louet David 8-shaft loom many years ago, and have found it a joy to use. I have found the treadles very easy to push down, no matter how many shafts are connected. Certainly I find the treadling much easier than on jack looms. I have made a wide variety of projects on this loom, and wouldn't trade it for any other type of loom.

filigreegarden (not verified)

Is there a way to adjust the tie-up or springs so that the treadling is easier? I wonder why this David loom I tried seemed so hard to treadle? There seemed to be a lot of resistance and I really had to push down, almost harder than with my jack loom. I am puzzled because I was expecting a much lighter treadling experience.

Frances G. (not verified)

I'm puzzled too. I suggest you call Louet and ask them about the spring tension. The treadling should be almost effortless. Sorry I can't be of much help. I wish you could try mine, but I'm in central Ontario.

Michael White

Hi, the first thing you need to do is disconnect the springs and see if the frames move freely. It could be that your loom just needs a good cleaning and maybe a little lubrication at the joints. As you press on a treadle look to see if the treadles on either side are trying to move? Check all moving pieces to see if more then one part is trying to move.

Michael

filigreegarden (not verified)

I may have to call Louet because I don't see any assembly instructions on their website for this loom. The pdf file they list does not work.

I didn't buy the loom, so I don't have it here to play with to see if it can be altered.

 

filigreegarden (not verified)

By the way, do you have the friction brake on your loom? I wondered if this was a good upgrade.

Frances G. (not verified)

Yes I have the friction brake. I didn't know there was a choice. Thinking about your problem, maybe if you tied up one shaft to one treadle, pressed down, then tied up another shaft, etc. until you have tried with all 8 shafts connected, maybe you could find the problem. I regard the Louet David as a Cadillac of looms, compared to Chevy jack looms, and I wish I could be of more help. Could you get someone mechanical - doesn't have to be a weaver - to look at it?

Jerri S

I have a David, and it took a little getting used to and adjusting. 

I do have the friction brake, added it after I bought it, and it is helpful, otherwise, I would have to get up each time I advance the warp.

As far as difficult treadling, most problems can be worked out. Two simple things to check (ask me how I know):1. the metal bars, I guess the lamms. They fit into a plastic washer and if they are not inserted correctly or there is any dirt or fiber, they are sticky. 2. The cords that go from the shafts up into the castle and over little wheels. The cords can slip off these wheels and get very stiff. There may be a little cover/shelf covering the top of the castle, this pops out and you can see the cords and wheels. These wheels can also get dirty.

Louet has a handout on how to adust the shafts...if the cords aren't adjusted correctly from lamm to treadle, and from lamm to bottom of shaft, or if they are too short from the top of the shaft, treadling is difficult to say the least.

Since the shafts aren't frames, they can hang up on each other without a warp on the loom,

I just finished a project on the David that had been sitting for wwaayyy to long. It does treadle easily. I have considered selling it because I don't use it much, but then I weave on it ,and realize that it is very easy to weave on.

My only warning: skip the raddle that comes on the loom. I have never figured out how to successfully use it; hopelessly ruined 2 warps. Might be operator error, but I use my own raddle on the back beam, the way I am used to.

Good luck it is a sweet little loom.

 

filigreegarden (not verified)

Thanks for all the helpful information. I haven't made a firm decision about the used David loom, though I know someone else is interested in purchasing it and I sort of passed on it temporarily. However, after weaving for the day on my 4-harness Leclerc jack loom, I realized how much more effort is required to treadle that one as compared to the Louet, even with the sticky treadles. So I am having second thoughts about the David. Maybe I might see if it is still available. ;-)

I was wondering how you like not having a shuttle race. Do you find the shuttle pokes through the warp without it?

 

LynnM (not verified)

I'm new to weaving, and just got a used Louet Spring (built in 1995) for Christmas, which is different than a David, but some of the parts you mentioned are on both.  I found it easy to use the built-in raddle following the Louet video, and when I first got the loom home, it was a bit more difficult to use with all the lams attached to treadles.  After reading the directions, and speaking with Jane Stafford, I am now keeping unused shafts locked with the locking pin to keep them out of the way, and have loosened the cord on 4 of the shafts because they were difficult to move, and now it treadles very easily.  Maybe some of the shafts are just tied up too tightly.  I would also guess that if the cords are slipping off the wheels they might be too loose?

Frances G. (not verified)

Like Jerri, I only used the built-in raddle twice, and screwed up each time. I went back to my regular raddle on the back beam. And that's a good idea, to check the cords going over the wheels. The David is such easy treadling, I've thought it is a great loom to grow old with!

filigreegarden (not verified)

How long did it take you to order the friction brake? They're telling me they are not in stock at Louet, so it could take 2-3 months to get one. (!) I had just decided to buy this used loom, but not having the friction brake for months is a definite disappointment.

Jerri S

I actually bought this loom used from someone else maybe 8-9 years ago. If Louet doesn't have the brake, maybe check with some Louet loom sellers; I imagine they order it when they need it from louet, but someone may have one in stock.  Even without the friction brake, I don't think you will be disappointed, and when you get it, it will be like X-mas! :)

filigreegarden (not verified)

Been calling around without success. I am now checking with a place in the UK to see if they have it in stock.

BUT now I am wondering if live weight tensioning might work in this case. This is intriguing. http://www.tienchiu.com/2009/05/live-weight-warp-tensioning-system/

Buying a loom made by a company outside of the US makes me wonder about the availability of parts should something break. Hmm...maybe something to consider in a loom purchase decision. :-/

 

 

Cleo

I purchased a used Louet David this year also.  I emailed Louet and received answers to several questions directly from them.  I also opened the pdf on the David on their site with no problem other than it takes a really long time to load and I have a new computer and fast internet so you just have to be patient.  I also purchased the cd and found it very helpful.  The lady I purchased the loom from gave me a roll of texsolv cord and I replaced the treadle tie ups so they were the same length.  I love this loom and other then having to remember to reinsert the pin after I am finished and using the opposite tie-up (sinking rather than rising shed) I have had no problems.  I have the brake but it is somewhat worn out and I was told to order parts from a dealer.  I love the built in raddle and wished I had one like it on my wolf loom.  The cd really helps with how to warp this loom.  I am considering buying another Louet loom in the future because of how well this one works and it is at least ten years old.

filigreegarden (not verified)

Thanks for all your feedback but we couldn't come to an agreement on price since I also wanted the friction brake. Husband set a dollar limit on the purchase and the brake pushed it over the edge. Oh well...I'll save my money for a dream loom in the future I guess, and stick to 4 shafts for now.

Cheryl Muckenfuss (not verified)

I have a David and it is very easy to treadle and quiet which is why I bought it.  I would suggest taking a look at the pulleys in the castle to verify all the cords are on them and not between any of them as this would contribute to difficulty in treadling.

Frances G. (not verified)

I paid $1,000 Cdn. for a used Louet David, the smaller size, 28.5", with the friction brake and sectional warping equipment , a long time ago (20 years ago? I don't remember.) I had no idea there was a CD available, or even a PDF file. I have never had to buy any replacement parts, despite constant use.

filigreegarden (not verified)

I didn't know Louet had made the David for so long. I thought it was a newer model. Interesting. I even saw a cherry version online that someone had bought used. It was lovely. I was surprised to see it in this wood. It's good to hear that your loom is holding up so well.

filigreegarden (not verified)

Can someone with the David please measure their treadle tie-up cords and tell me how long they are supposed to be? From what I understand, they normally come a certain precut length from Louet for this loom, and I need to know what that length is. Thanks.

Submitted by Anonymous (not verified) on