$2 Thrift Store Loom-part 1

(click pictures for larger image)



Back to the fiber adventure. Above is a needlepoint stitching kit I bought for $2.00. It has a mesh background with a printed pattern to follow that is tacked to a wooden frame measuring about 10 inch by 8 inch on the outside. It includes over a dozen hanks of embroidery floss. I bought it to make a loom out of it.




Here is the wooden frame. I attached pencils with clear plastic tape to raise the warp and give me some room for tension adjustment. If the tension gets too tight, I'll remove a pencil to give some slack.



Here is the frame with a continuous warp of #10 cotton crochet thread, about 100 ends. I tried to weave some floss with a crosstitch needle. I quickly realized the warp was too close and many of the warps were crossed over each other.



The warp is wrapped around the front and back of the frame. I followed the warp around and around the loom making sure all the warps do not cross over the one next to it. Once it was straightened out, I set the cross using pencils and safety strings. The knitting needle was helpful in picking up threads.



Once the crossed warps are straightened out, I need to spread out the warps. So I put three rows of twining on the warps. This spread the warps very well. You can also see the string heddle on a pencil.



In this picture you can see I am using the knitting needle to open the shed to make room for the ruler I am using for a shed stick. When I turn the shed stick it opens the shed (spread upper/lower warp apart) so I can push the shuttle stick, which is the pencil with the red floss wrapped around it.



Here you can see the pocket comb I am using as a beater to push the warp into place. Right now I'm getting a very uneven spread of weft, too far apart then very close. Very gauzy in spots so I now have one way of doing gauze which is on my list. I am thinking I should use double floss to fill in the weaving more.



Have a good day!

 

Comments

Bonnie Datta (not verified)

Hi Franco.  I really admire your tenacity with found-objects-turned-loom approach!  I think you got a great buy -- all those sumptuous colors of yarn.  I have tried using a frame loom like you demonstrate so well in your post and I find it is just too frustrating and slow.  Especially a small one as it is harder to hold/weave/beat.  And with such a short length of warp, incredibly small variations in tension result in waves that just keep getting bigger.  For a simple loom set-up, backstrap or warp-weighted vertical looms can't be beat, IMHO.  Your photos are super!

Bonnie.

 

Caroline (not verified)

Great find Franco! I'm sure those tapestry and embroidery frames are far superior in strength to artists stretchers, and when you can pick up the tapestry wools as well!!!!!!!!!!! What a bonus, as they are not cheap.

I do quite well at my local thrift shop too, though I tend to haunt the hardware store too. All these great things that can be re-purposed into crafty frames and looms. And at a fraction of the cost too. It requires lateral thinking and you have that in spades! Keep inspiring people, Franco, and show them how a bit of creativity might take time, but will not break the bank.

francorios (not verified)

Bonnie - I agree the small frame format has limitations but it does allow me to make wholesale changes at small cost in materials.

Graciela - I must confess I have browsed your blog and many of the blogs you have links to. The small frame loom art pieces I see people weaving and hanging on their walls are fascinating.  Having the loom and the heddle and tools all together with the woven piece is exotic and not seen very often around here.

Caroline - This little frame is finger grooved together in the corners and because it is small, it holds up to to the warp tension no problem. I've got to admit this is fun. Just the thing to take my mind of the recent disaster on the backstrap loom. I'll be back on the back strap loom in a couple of weeks.

Thank you all for your kind remarks. More pictures will follow in a couple of days.

Have a good day!

Submitted by Anonymous (not verified) on