I am in the middle of weaving a narrow rug and would like to make it longer. Does anyone know of a more intelligent method to lengthen a warp which is already on the loom  than simply tying additional thread to each end and then weighting it in groups of ends? Thanks in advance for any help.

Comments

rose Goldielocks (not verified)

nope.... I don't own any of the thread streachers related to the board streachers and sky hooks.....

 but Seriously,  you may consider stagering your tie-on knots over several inches... in a zig-zag fashion across the warp. (If you were to look close, the knots would  make a 'WWWW' across your warp)  That way you can hide the thickness of the extra warp with the weft better.

A purchase of embroidery floss bobins and a package of binder clamps from the office store may lessen the agrivation of loose weighted threads.  (Binder clip is the the kind of clip that comes on a large stack of papers, that a staple wont go through) I Pry off one of the metal clamps, thread a fishing weight on the wire and put the metal wire clamp back. This makes a handy weight adjustable weight. I then use the binder clamp with the weight attached to keep the embroidery floss bobin from unrolling.  I have used this meathod handle threads for both tablet weaving and kumihimo.  (when I need more thread loose, I unclip the weight, unwind the thread, and put the clip back to hold the bobbin again.) If I leave more than about 5" dangle, the threads/weights twist around each other.

Sara von Tresckow

If your piece is decorative, the suggestions here will work. If your rug is meant for floor traffic, you're best off just finishing your present warp and starting over with a longer piece. Under foot, those knots will loosen and break - same would apply to something put in the wash machine on a regular basis.

Submitted by Anonymous (not verified) on