I have recently started weaving again after 30 years. The one time I dressed the loom it was done from front to back. I took a refresher class a couple of months ago. They instructed us to warp from back to front. My question is, is there an advantage to doing it one way or the other with the LeClerc Artisat loom? I'm not really skilled in either method at this point and I haven't dressed my loom yet, just the ones in my classroom which weren't LeClerc. If anyone knows anything about the Artisat and can guide me to the easiest way for that loom I would appreciate any feedback you might have for me. I do have documentation for dressing the loom by myself both ways, but I'm putting off doing it in hopes of getting some other opinions. I'm leaning towards doing it back to front since that is the way I did it most recently in class, but I'm open to either. Thanks!!

Harriett

Comments

Claudia Segal (not verified)

Hi Harriett,

I don't have an Artisat but I do have a jack loom and have warped both ways.  It is really personal choice.  I like warping back-to-front (b2f) because I find I can get better tension on the warp.  Some weavers prefer f2b, it's just personal preference.

Welcome back to weaving and be sure to post pictures as you get the loom warped and your project underway.  

Feel free to ask any questions at any time.  That's what we are here for.

Claudia

dessertgoddess (not verified)

Hi, Harriet!  I love my Artisat!  I learned to warp front to back, and stuck with it for about five years, until one warp became a complete nightmare when I was winding it on.  Threads were breaking, I was crying, pets were scrambling for cover!  I pulled it all back out, got out Deborah Chandler's book and the issue of Handwoven that was completely devoted to warping.  I read and read and looked at some YouTube videos and plunged into back to fronting.  I can tell you, I will never go back to front-to-back!  I know it has its purpose; I know there are reasons to do it, but back to front, especially when I warp by myself, is just so much easier.  It's easier on fragile warp yarns, too, since they only get pulled through heddles and reeds twice, rather than three times with front to back.

While I don't think the loom changes that, the Artisat is small enough to keep a pretty even tension by myself while winding the warp onto the back beam.  It's comfortable to sit in front while threading the heddles and reed, if you remove the breast beam, which is very easy to do with the screw driver that comes with the loom.  

There are firm devotees on both sides, and you really need to find out what works best for you.  I'd stick with what's fresh in your mind now, dress the loom a lot more times, then venture into your own method, based on YOUR experience!  Have fun, welcome back to weaving and let us know how it comes out!

Maggie

Harriett (not verified)

Thanks for the information. I think I will stick with what I have done most recently. Maggie, have you ever changed the break circle? Mine was sort of rusted after being in storage and basements for long periods of time. I changed it, but didn't see the information that LeClerc has on it's website that you should not uncoil it but slip it onto the beam. So, it has been stretched out slightly but now that I have the harnesses back in position the break seems to only be turning in the correct direction.  With the harnesses out I could move the beam in both directions with my hands. Think I should chance it or just order a new one before I get the loom dressed? Also, my spring seems pretty oxidixed. Think I should replace that? I can't really tell if it is working like it should. Thanks for your help!

Harriett

 

Submitted by Anonymous (not verified) on