I'm beginning to thread my loom for a project called Color Windows, from Issue 28, Weaver's, summer 1995, page 21. I don't want to goof up, as it is a double-weave project. I can't get my head around how the colour sequence of the warp works with the threading. And it would be nice to check that there were no corrections for this project. If someone has this issue, could they take a look at it, and just explain roughly what is happening in the threading? I've stopped threading the heddles until I understand. I hate working "blind".

Thanks!

Frances Gualtieri

Vankoughnet, Ontario, Canada

Comments

Claudia Segal (not verified)

Now  I wish I had that issue of Weaver's.  Without being able to see the threading, it's hard to answer.  The double weave projects I've done, I have felt as though my threading was working blind.  I understand you do not want to proceed without understanding what is happening.  

Do you have enough warp for a sample?  I would suggest you continue and see how things start to work out once you start weaving your sample.  

There are some wonderful resources at handweaving.net.  I searched under double weave and found all these http://handweaving.net/DASearch.aspx

I found the ones by Paul O'Connor particularly easy to understand.

Good luck,

Claudia

Claudia

tien (not verified)

Just a quick note to say I'll look into this when I get home...I have a complete collection of Weaver's, so I'm pretty sure I can lay my hands on the issue.

tien (not verified)

Got home and looked it up.  There are basically two things going on:

First, black ends always alternate with colored ends.  This is because you are threading up for two layers, one solid black and one solid colored.  First you take a thread from one layer, then a thread from the second layer, and so on - alternating black and color throughout.

After that, just follow the threading diagram.  Count out 35 ends of color 1, thread it up alternating with black ends.  When you run out of color 1 ends, change to black alternating with color 2 (you should have 26 ends of color 2), when you run out of color 2, change to color 3, and so on.

Does that help clear things up?  If not, let me know what's confusing you and I'll do my best to explain...

Frances G. (not verified)

I have gone ahead with the threading. I think what was confusing me was, the colours blend into each other in the blocks; they are not one solid colour. It should look great if everything goes well.

Frances

 

 

 

 

Bonnie Inouye (not verified)

Frances, the color blending you see in the blocks comes from warp and weft together. When weaving this cloth, you will alternate one dark or black weft (for the black layer) and then one colored weft which will interlace in plain weave with all of the colors in that layer of warp. Say your warp starts with black alternating with 35 threads of orange and then with 35 threads of red. If you use a gold weft for the colored layer, it will make orange-and-gold where it crosses the orange warp and red-and-gold where it crosses the red warp.

"Windows" is one of the classic ways to make a pattern in blocks of double weave on 8 shafts. You can find many variations of this in books and magazines, and probably some in the Weavo projects.

Weaving software can help you to understand how a draft works. Even a free demo version will be good in this case.

Bonnie

 

Frances G. (not verified)

I have the loom warped, the pedals tied up, and am set to go. Unfortunately, the project will have to "age" for a while before I can get back to it. But I'm eager to see the colour effects. The Tubular Spectrum colours are spectacular; I like just looking at the cones beside the loom! I think everything will fall into place once I begin weaving.

I've done double-weave before, but not 8-shaft. Weaving software may be somewhere in my future, but not right away.

 

 

Submitted by Anonymous (not verified) on