Hello again

So, I'm wondering what are the purposes of warp sizing? I know that applying moisture to yarn is helpful to prevent breakage (though for me this has been more relevant to machine knitting than weaving, but never mind) but I was wondering also if warp sizing could also be helpful for stopping hair yarns from snagging against each other and creating a bad sett leading to the weft not getting beat down properly and making these wee weft bubbles, which are well annoying. It happens to me a lot when I'm weaving with wool in plain weave, which I am wont to do. Not so much in twills and such for obvious reason, and also it seems to happen more towards the selvedge, which I can't figure out, because my tension is fine

so yeah

thanks in advance

-andrew

Comments

laurafry

Generally warp sizing helps to strengthen a 'weak' yarn, or tame the hairy tangles as you mention.

cheers,

Laura

apk5 (not verified)

thanks again laura. Are there any "recipes" online that I could use, and should I size the warp then it's in stretch, or is there maybe some way of sizing threads as they're being warped, as I sometimes warp sectionally because really wide warps or double cloth are too much for my warping frame

laurafry

You could try googling gelatin sizing (for protein fibres) or flax seed sizing (for linen).  You can also use corn starch, potato starch - there are a bunch of different recipes, depending on what was commonly available.  I have flax and gelatin recipes in Magic in the Water, Linda Heinrich has flax in The Magic of Linen.  I prefer to size the skeins rather than the warp, but that's just personal preference.  Not sure about doing spools as you are beaming, though.  I think you can paint a sizing on the warp once it's been beamed but that means doing in on the loom which might be a problem.

cheers,

Laura

AndiTr

I am just about finished weaving a warp that I discovered I needed to size (read strengthen) when I started weaving.  The warp is linen, soft and hard spun.  It was abrading as I wove.  So first resley down from 30 to 24.  But I didn't like the cloth.  So look for a sizing recipe.  Among the googled results was starch.  I picked up a can of spray starch.  Woohoo, the breakage stopped.  Okay now lets resley again up to 30.  And it is still not breaking.  But I have to say, plastic bags on the loom and spraying between the beam and the heddles, wait for it to dry, weave, and start over again is not fun.  Good thing I could spray, then go to work.  I also have silk that I discovered needed the sizing.  So next time, measure the warp, and dump it in a bucket of starch for either the linen or the silk.  Then dress the loom.  But the starch worked wonders on both the linen and the silk.  Both of which abraded while weaving.

apk5 (not verified)

thanks for the advice everyone

Submitted by Anonymous (not verified) on